Sciperio, Inc.

12151 Research Pkwy. Suite 150 Array
Orlando, FL 32826
http://www.sciperio.com
50 Employees

SBIR Award Summary

Total Number of Awards 24
Total Value of Awards $5.39MM
First Award Date 01/01/98
Most Recent Award Date 07/14/16

24 Awards Won

Phase 1 SBIR

Agency: Army
Topic: A16-006
Budget: 07/14/16 - 01/13/17

Direct Digital Manufacturing is a combination of 3D printing, Direct printing, pick and place and milling to manufacture electronic devices. Next generation Direct Digital Manufacturing will have a significant amount of 3D printing and this aids in reducing costs due to waste and also due to products on demand. The ability to print parts that ...

Phase 2 SBIR

Agency: Army
Topic: A14-059
Budget: 12/06/15 - 12/05/16

The printed approach that Sciperio used in Phase I demonstrated that it is feasible to utilize direct printing to manufacture ignition bridges. The direct printed approach is a combination of printed electronics and 3D printing. The conductive materials were printed and the holder for the materials of interest was 3D printed and then filled. Thi...

Phase 1 STTR

Institution: University of South Florida

Agency: Navy
Topic: N14A-T021
Budget: 08/04/14 - 06/04/15

3D printed phased array antennas (PAA) would be more rugged, lighter and take a variety of shapes and including unmanned aerial vehicle (UAV) wings. Printing antennas, passives and interconnects has been demonstrated in 3D printing. Using printed electronic approaches for printing Field Effect Transistors (FET) has been demonstrated and includin...

Phase 2 SBIR

Agency: Air Force
Topic: AF121-003
Budget: 02/26/14 - 05/23/16

ABSTRACT: Using the advantages of 3D printing, an antenna system wing structure will be printed. The antenna system will be a multi-layer electronic device with a number of antenna elements. The electronics will not be mounted to the wing structure, they will become part of the wing structure. This implies an impact to Size, Weight and Power ...

Phase 1 SBIR

Agency: Army
Topic: A14-059
Budget: 01/01/14 - 12/31/14

Initiators are used in Electro-explosive devices (EED?s) and must ensure the energetic device is not activated by accident and it must activate with guaranteed success when triggered. There are a number of initiator designs but the printed ignition bridge that has been demonstrated by the Army has potential to meet the safety and security crite...

Phase 1 STTR

Institution: Georgia Institute of Technology

Agency: Army
Topic: A13A-T010
Budget: 09/16/13 - 03/14/14

Sciperio with team members Georgia Institute of Technology and Centecorp have teamed up to develop an Additive Manufacturing Composite using nano and micro fillers. The team will develop multi-scale models that are supported by experimental characterization for advanced 3D Printable materials. Inelastic response of high strength hierarchical s...

Phase 1 SBIR

Agency: Navy
Topic: N101-082
Budget: 05/10/10 - 03/09/11

There is potential for the Navy to improve shipboard desalinization using state of the art Reverse Osmosis (RO) with pressurized feedback. We are proposing not only to provide the highest efficient RO technology, but done so in a package to reduce the weight of the system, reduce the noise during operation, reduce the maintenance required by ext...

Phase 1 SBIR

Agency: Air Force
Topic: AF093-159
Budget: 12/09/09 - 09/09/10

There are a number of sensors capable of detecting valuable information. However these sensors are many times only valuable if they are in a strategic location. To place the sensor in a strategic location it potentially requires some type of concealment and would also be remote. One of the biggest issues we struggle with power to drive the re...

Phase 2 SBIR

Agency: Air Force
Topic: AF06-258
Budget: 07/12/07 - 10/05/09

A methodology is proposed to provide intelligence to more classical global optimization schemes. By incorporating these methods, design engineers will be able to not only identify and resolve difficulties within an antenna element, but will be able to synthesis and optimize an entire array, including the antenna elements, feed structures, array...

Phase 1 SBIR

Agency: Special Operations Command
Topic: SOCOM06-003
Budget: 09/27/06 - 03/27/07

A longwire antenna module is proposed, incorporating a length reduction technique that yields 25-75% length reduction with minimal impact on gain. A resonant monopole antenna operating at 535kHz is approximately 440ft long; length reduction techniques will reduce this to between 69ft and 134ft depending upon the desired gain. A shorter/lighter...

Load More