Native American Technologies CO.

P.O. Box 39
Golden, CO 80402
http://www.natech-inc.com
13 Employees

SBIR Award Summary

Total Number of Awards 9
Total Value of Awards $1.84MM
First Award Date 08/01/95
Most Recent Award Date 03/14/13

Key Personnel

Last Name Name Awards Contact
Jones Dr. Jerald E. Jones 6 Message
Jones Jerry Jones 3 Message

9 Awards Won

Phase 1 SBIR

Agency: Navy
Topic: N123-157
Budget: 03/14/13 - 09/14/13

Develop a new steel cutting process which will significantly increase the cutting rate of ship hull material for shipbreaking. In addition, the process will reduce the fume and smoke emissions to within Navy and civilian requirements and the opacity of particulate emissions to within Navy and civilian requirements.

Phase 1 SBIR

Agency: Navy
Topic: N091-065
Budget: 05/18/09 - 03/18/10

Develop a new and innovative system for cleaning paint and other coatings from surfaces and producing the necessary profile for applying new coatings. The process will use induction heating to create bubbles and a pressure differential to collapse the bubbles causing cavitation to occur, resulting in surface cleaning and profiling.

Phase 2 SBIR

Agency: Department of Energy
Topic: 2008
Budget: 01/01/08 - 12/31/08

Utility-scale wind turbines are getting so large that transportation limitations are driving final, onsite assembly costs.  To address this problem, this project will design an apparatus for placing wind turbine components ¿ the nacelle, generator, gear box, rotor, and blades ¿ on top of an in-situ-fabricated, self-erecting tower, without using ...

Phase 1 SBIR

Agency: Department of Energy
Topic: 2007
Budget: 01/01/07 - 12/31/07

Large utility scale wind turbines are getting so large that transportation limitations are driving final, onsite assembly costs.  To address this problem, this project will design an apparatus for placing wind turbine components ¿ the nacelle, generator, gear box, rotor, and blades ¿ on top of an in situ fabricated, self-erecting tower, without ...

Phase 1 SBIR

Agency: Department of Energy
Topic: 2002
Budget: 01/01/02 - 12/31/02

70817 The load carrying capacity of large trucks could be increased by 9 percent if the truck frames were produced from aluminum alloy rather than steel. If 50% of the U.S. fleet of trucks were produced with aluminum frames, there would be a fuel savings of 32 million barrels of fuel annually. This project will develop a process to pre-fo...

Phase 2 SBIR

Agency: Navy
Topic: N98-001
Budget: 03/02/00 - 03/01/02

The purpose of this Phase I proposal is to verify the feasibility fro use of a robotic laser fabrication and repair system and to show how this innovative technology application will reduce costs of Warfighter systems and components, and improve performance and reliability. This system will provide impact in the shipyard, on the factory floor, i...

Phase 1 SBIR

Agency: Navy
Topic: N98-001
Budget: 04/23/98 - 11/15/98

The purpose of this Phase I proposal is to verify the feasibility fro use of a robotic laser fabrication and repair system and to show how this innovative technology application will reduce costs of Warfighter systems and components, and improve performance and reliability. This system will provide impact in the shipyard, on the factory floor, i...

Phase 1 SBIR

Agency: Department of Commerce
Topic: 1997
Budget: 01/01/97 - 12/31/97

The purpose of this Phase 1 project is to demonstrate the ability to develop a neural network model of the ceramic grinding process with fusion of the sensor/process control parameter data. A model will be developed from existing NIST data using artificial neural systems (ANS) with algorithms that have previously been specifically designed to pr...

Phase 1 SBIR

Agency: Office of the Secretary of Defense
Topic: OSD95-017
Budget: 08/01/95 - 02/28/96