Production Products MFG & Sales, Inc.

1285 Dunn Road
St. Louis, MO 63138
http://ppstl.net
150 Employees

SBIR Award Summary

Total Number of Awards 23
Total Value of Awards $6.19MM
First Award Date 07/14/94
Most Recent Award Date 04/04/05

Key Personnel

Last Name Name Awards Contact
Corona Mr. Barry M. Corona 1 Message
Dorr Jim Dorr 2
Corona Kelli A. Corona 5
Coronoa-Bittick Kelli Coronoa-Bittick 1
Holdinghausen Diana Holdinghausen 1
Corona-Bittick Ms. Kelli Corona-Bittick 13 Message
Gaffney Daniel P. Gaffney 3 Message

23 Awards Won

Phase 1 SBIR

Agency: Air Force
Topic: AF05-117
Budget: 04/04/05 - 04/04/06

Production Products is proposing a rapidly deployable Chemical/Biological (CB) protected shelter to house fighter aircraft or portions of the aircraft during maintenance operations. The shelter system will be rapidly deployable, have its own filtration and air handling system, and will be highly adaptable to sealing against surfaces. Furthermo...

Phase 1 SBIR

Agency: Army
Topic: A04-091
Budget: 12/16/04 - 06/16/05

Production Products and the University of Delaware - Center for Composite Materials (UD-CCM) will develop a 200-gallon fuel tank design concept that will be 50% less parasitic weight than the current lowest weight crashworthy, ballistically tolerant, self-sealing (Type I) tank construction at 0.9 lb/ft2. This design will meet the requirements ...

Phase 2 SBIR

Agency: Navy
Topic: N01-088
Budget: 09/30/02 - 09/30/04

In Phase I Production Products designed a polyurethane shock and vibration mount system, fabricated prototypes, performed load stroke and shock testing, analytically predicted shock and vibration performance, and demonstrated the ability to meet analytical predictions. Shock mount designs were subjected to shock tests to over 200 g's with a...

Phase 1 STTR

Institution: University of Delaware

Agency: Navy
Topic: N01T007
Budget: 07/02/01 - 01/15/02

Production Products and the University of Delaware Center for Composite Materials will develop low cost vacuum assisted resin transfer molding (VARTM) composite fabrication techniques and design for the manufacture of dimensionally critical hydrodynamically smooth lifting surfaces for Naval vessels. This will lead to significant reduction in th...

Phase 1 SBIR

Agency: Navy
Topic: N01-088
Budget: 05/01/01 - 11/02/01

Production Products will develop a low cost machinery mount system for shock mitigation and vibration isolation over a wide operating load range. Isolation mounts are used on ships to protect equipment from shock, reduce vibration noise, and minimize the transmission of vibration energy of machinery to the ship hull. Successful development of a...

Phase 2 SBIR

Agency: Navy
Topic: N98-094
Budget: 06/13/00 - 06/13/02

Production Products will develop a new family of low cost, multiple performance, generic elastomeric vibration isolation mounts which will provide varying static and dynamic vibration properties to allow vibration and shock isolation over a wide operation load range. Dr. Colin Ratcliffe, United States Naval Academy, who has ongoing work on non-...

Phase 2 STTR

Institution: Southern Research Institute

Agency: Air Force
Topic: AF97T008
Budget: 02/12/99 - 02/12/01

Production Products and Southern Research Institute will develop composite tools and processes that are significantly lower cost, allow for shorter fabrication times with excellent durability and thermal characteristics. We will use a novel resistive heating concept which applies heat only to the part being processed. Our composite tooling appro...

Phase 1 SBIR

Agency: Office of the Secretary of Defense
Topic: OSD98-032
Budget: 12/16/98 - 06/15/99

Production Products will develop a lightweight, modular, easily deployable barrier system that will be based on out proven polyurethane composite technology that has demonstrated the ability to absorb very high levels of elongation and energy without failure. This material can be elongated 500% repeatedly and still returns to it's original shap...

Phase 2 SBIR

Agency: Navy
Topic: N96-158
Budget: 06/04/98 - 05/20/00

The objectives of this Phase II program are to develop and demonstrate full scale, shop floor manufacturing processes for fabricating thermoplastic composite structures and to develop equipment, materials, and processes for the application of thermoplastic adhesive bonding. The specific processing concepts to be developed and demonstrated are (1...

Phase 1 SBIR

Agency: Navy
Topic: N98-094
Budget: 05/20/98 - 11/20/98

Production Products will develop a new low cost, multiple performance, generic elastomeric machinery mount system which will provide varying static and dynamic vibration properties to allow vibration and shock isolation over a wide operation load range. Dr. Colin Ratcliffe, United States Naval Academy, who has ongoing work on non-metallic machi...

Load More