Hentzen Coatings, Inc.

6937 WEST MILL ROAD
Milwaukee, WI 53218
http://www.hentzen.com
170 Employees

SBIR Award Summary

Total Number of Awards 5
Total Value of Awards $1.77MM
First Award Date 03/25/05
Most Recent Award Date 03/21/08

Key Personnel

Last Name Name Awards Contact
Chiang Dr. Robert Chiang 5 Message

5 Awards Won

Phase 2 SBIR

Agency: Air Force
Topic: AF071-110
Budget: 03/21/08 - 07/21/10

In the Phase I study of Zero Volatile Organic Compounds (VOC) Aircraft Coatings (Contract Number FA8650-07-M-5029), the feasibility to formulate environmentally safe, high performance, dual-cure (UV cure followed by air dry) urethane gloss topcoat as well as conventional fast dry two-component chromate-free epoxy primer, was demonstrated by ...

Phase 1 SBIR

Agency: Air Force
Topic: AF071-110
Budget: 04/30/07 - 08/30/08

The solvent-based epoxy primers per MIL-PRF-23377 and urethane topcoats per MIL-PRF-85285 Type I are widely used on military aircraft. The primers currently are allowed to have a maximum volatile organic compound (VOC) emission of 340g/l and 420g/l for the topcoats. The solvents used in the coatings are the primary source for the VOC. Some so...

Phase 1 SBIR

Agency: Air Force
Topic: AF06-328
Budget: 08/15/06 - 05/15/07

The objective of Phase I project is to demonstrate the feasability to manufacture a liquefied powder coating that will meet Air Force specification requirements. Utilizing a new innovative technology will allow a powder coating to be liquefied and atomized as it comes out a spray device and applied to a substrate of any type. This applied lique...

Phase 2 SBIR

Agency: Air Force
Topic: AF05-133
Budget: 06/16/06 - 10/16/08

The coating system currently used on U.S. Air Force and Navy aircraft is a two-coat system consisting of a chromated epoxy primer per MIL-PRF-23377 ("23377 primer") underneath a urethane topcoat per MIL-PRF-85285 ("85285 topcoat"). The development of a multi-functional coating with advanced performance properties is critical to achieving a sing...

Phase 1 SBIR

Agency: Air Force
Topic: AF05-133
Budget: 03/25/05 - 03/25/06

The objective of proposal is to demonstrate the feasibility of manufacturing a coating with nearly all the performance properties of a MIL-PRF-23377 epoxy primer and a MIL-PRF-85285 urethane topcoat, particularly the adhesion, corrosion, and the weather resistance properties of those specifications. Hentzen's prototype coating will also be ...