Springborn Labs, Inc.

10 SPRINGBORN CTR
Enfield, CT 06082
250 Employees

SBIR Award Summary

Total Number of Awards 26
Total Value of Awards $3.01MM
First Award Date 01/01/83
Most Recent Award Date 08/03/91

Key Personnel

Last Name Name Awards Contact
Holley William H Holley 2
Baum Bernardd Baum PhD 1
Diehl Mr. W. R. Diehl 1
Baum Dr. Bernard Baum 8
Diehl W Robert Diehl 1
White Roy A. White 7
baum Bernard baum 1
Galica James P Galica 4
willis Paul b willis 1

26 Awards Won

Phase 2 SBIR

Agency: Navy
Topic: N89-191
Budget: 08/03/91 - 08/03/92

Effective sealing or resealing of joints in PCC runways for military aircraft is an old and on-going problem. Many of the presently used materials are deficient due to attack by fuel and hydraulic fluid, melting/trailing on exposure to jet engine blast, loss of adhesion to pavement, especially at low temperatures, etc. During Phase I of the prop...

Phase 2 SBIR

Agency: Army
Topic: A88-116
Budget: 01/01/91 - 12/31/91

The objective of Phase II is to further develop the radio frequency, induction, resistance, infrared and ultraviolet methods shown to be feasible in Phase I for accelerating the cure of thermosetting epoxy adhesives. The program will address adhesive selection and process optimization to the extent that an adhesive and rapid curing technique is...

Phase 1 SBIR

Agency: Navy
Topic: N89-191
Budget: 09/29/89 - 12/31/89

Phase 1 SBIR

Agency: Navy
Topic: N89-174
Budget: 07/18/89 - 12/31/89

Phase 2 SBIR

Agency: National Aeronautics and Space Administration
Topic: 89-2
Budget: 01/01/89 - 12/31/89

THIS PROGRAM PROPOSES TO DEVELOP A SPECIALIZED FLOOR COVERING MATERIAL THAT IS HIGHLY RESISTANT TO CHEMICAL EXPOSURE, ANTISTATIC, NON-PARTICLE GENERATING, NON-FLAMMABLE, INEXPENSIVE IN COST AND EASY TO INSTALL AND REPAIR. THE PROGRAM SYSTEMATICALLY EVALUATES A NUMBER OF POLYMERIC AND ELASTOMERIC MATERIALS FOR THEIR CHEMICAL RESISTANCE TO ANUMBER...

Phase 2 SBIR

Agency: Army
Topic: A86-135
Budget: 01/01/89 - 12/31/89

A PHASE I PROGRAM WITH NRDEC DEMONSTRATED THE FEASIBILITY OF THE BASIC CONCEPT OF COATING A SEWING THREAD WITH HOT MELT ADHESIVE, USING THE COATED THREAD TO SEW A GORE-TEX/SHELL FABRIC LAMINATE, AND THEN SEALING THE RESULTING NEEDLE HOLES BY APPLICATION OF HEAT. THIS PHASE II PROGRAM WILL DEVELOP A SEWING AND IN-LINE SEALING PROCESS USING A "UNI...

Phase 1 SBIR

Agency: Navy
Topic: N89-147
Budget: 01/01/89 - 12/31/89

Phase 1 SBIR

Agency: National Aeronautics and Space Administration
Topic: 88-1
Budget: 01/01/88 - 12/31/88

Phase 2 SBIR

Agency: Navy
Topic: N86-052
Budget: 01/01/88 - 12/31/88

MACROFOULING OF SONAR DOMES BY BARNACLES AND OTHER FORMS CAUSES DEGRADATION IN SONAR PERFORMANCE. BUTYL TIN BASED ANTIFOULANTS ARE PRESENTLY USED TO PREVENT THIS GROWTH, BUT THESE COMPOUNDS ARE TOXIC AND PRESENT A HAZARD TO NAVY PERSONNEL DURING INSTALLATION AND REMOVAL OF DOMES. PHASE I DEMONSTRATED THE FEASIBILITY OF ALTERNATE TREATMENT SYST...

Phase 1 SBIR

Agency: Army
Topic: A88-116
Budget: 01/01/88 - 12/31/88

Load More