Memry Technologies, Inc.

57 Commerce Drive
Brookfield, CT 06804
120 Employees

SBIR Award Summary

Total Number of Awards 10
Total Value of Awards $1.73MM
First Award Date 01/01/89
Most Recent Award Date 01/01/95

Key Personnel

Last Name Name Awards Contact
Schetky Dr. Laurence M Schetky 10

10 Awards Won

Phase 2 SBIR

Agency: National Aeronautics and Space Administration
Topic: 95-2
Budget: 01/01/95 - 12/31/95

Blade tip clearance in a gas turbine is critical; each increment of tip clearance reduction increases efficiency and reduces fuel consumption. In this study only the compressor section will be treated. Using a Lycoming T55L-712 turboshaft engine, which has wide commercial and military application, two stages of the compressor section will be mod...

Phase 2 SBIR

Agency: Department of Health & Human Services
Topic:
Budget: 07/01/94 - 11/30/95

Phase 1 SBIR

Agency: National Aeronautics and Space Administration
Topic: 94-1
Budget: 01/01/94 - 12/31/94

Phase 2 SBIR

Agency: Air Force
Topic: AF92-156
Budget: 12/10/93 - 12/15/95

Fastener improvement was identified in the Air Force Advisory Board's study fo subsystem and component reliability needs, FACTS. Nylon insert locknuts cannot be reused with confidence and alternative insert materials are required. Phase I studies of polymeric and metallic insert materials demonstratred that shape memory alloys will provide the ...

Phase 2 SBIR

Agency: Department of Health & Human Services
Topic:
Budget: 07/01/93 - 06/30/94

Based on Phase I results, Ti-Mo-Al alloys exhibit the best combination of superelastic springback, low modulus and ductility, and good potential as a new orthodontic alloy. In the short period of Phase I, optimization of the alloy composition and thermal mechanical processing was not possible. Phase II research will concentrate on Ti-Mo-Al base...

Phase 1 SBIR

Agency: Air Force
Topic: AF92-156
Budget: 08/15/92 - 02/15/93

Phase 1 SBIR

Agency: Department of Health & Human Services
Topic:
Budget: 09/15/91 - 04/14/92

An ideal orthodontic wire should exhibit bio-compatibility, creep resistance, weldability, formability and also, by suitable treatment, a variable elastic modulus or flexural stiffness. New titanium based shape memory effect alloys show promise of being close to this ideal. Based on preliminary studies of Titanium-Molybdenum-Aluminum and Titan...

Phase 2 SBIR

Agency: Navy
Topic: N89-008
Budget: 06/01/90 - 05/31/92

COMPOSITE MATERIALS WITH EMBEDDED SHAPE MEMORY ALLOYS OFFER ADVANTAGES AS INTERACTIVE MATERIALS FOR THE CONTROL OF VIBRATION AND NOISE. THE THEORY OF BEAMS, PLATES AND SHELLS IS WELL DEVELOPED, AND THE CHARACTERISTICS AND PROCESSING OF SHAPE MEMORY ALLOYS ARE ALSO ADVANCED. EARLIER WORK ON THESE MATERIALS HAS BEEN BASED ON GRAPHITE EPOXY COMPO...

Phase 1 SBIR

Agency: Navy
Topic: N89-008
Budget: 01/01/89 - 12/31/89

Phase 1 SBIR

Agency: Navy
Topic: N89-131
Budget: 01/01/89 - 12/31/89

Load More