Applied Optimization, Inc.

714 E Monument Ave Ste 204 Array
Dayton, OH 45402
http://www.appliedo.com
19 Employees

SBIR Award Summary

Total Number of Awards 27
Total Value of Awards $7.87MM
First Award Date 05/02/01
Most Recent Award Date 07/11/16

Key Personnel

Last Name Name Awards Contact
Chaudhary Dr. Anil Chaudhary 25 Message
Krivian Ms. B.J. Krivian 1
Keenan Catherine Keenan 4 Message
Payne Tamara Payne 2 Message
Keenan Catherine Keenan 0 Message
Zimmerman Mark Zimmerman 1 Message

27 Awards Won

Phase 1 SBIR

Agency: Navy
Topic: N161-071
Budget: 07/11/16 - 05/10/17

The research objective of this proposal is to demonstrate feasibility of Additive Manufacturing (AM) ICME to develop a conformal design heat exchanger (HeX) for the cooling of power electronics hardware. The conformal geometry of the cooling channels will be developed in order to attain higher thermal efficiency as compared to a commercial bench...

Phase 2 STTR

Institution: University of Tennessee

Agency: National Aeronautics and Space Administration
Topic: T12.04
Budget: 07/06/15 - 07/05/17

The ability to assign a level of confidence for build quality is fundamental to the deployment of powder bed technology. Accordingly, the research objective of this work is to use probability theory as a glue to combine the physics-based models used for the selection of processing parameters together in order to produce quality deposits using t...

Phase 1 STTR

Institution: The University of Tennessee

Agency: Navy
Topic: N15A-T008
Budget: 06/15/15 - 01/15/16

The research objective of this proposal is to demonstrate feasibility to collect and interpret in situ 3-D surface data for the laser sintered top surface for each layer in a powder bed process. The 3-D data collection will be performed with no interference with the operational efficiency and build time for the powder bed process. The 3-D data w...

Phase 1 SBIR

Agency: Navy
Topic: N151-012
Budget: 05/28/15 - 11/30/15

The research objective of this proposal is to demonstrate feasibility of accelerating the qualification procedure described in the SAE specification AMS 4999A for alloy Ti-6Al-4V direct deposited products, as applied to the laser-based blown powder deposition process. The program vision is to design, verify and maintain control of the uncertaint...

Phase 1 SBIR

Agency: Air Force
Topic: AF141-123
Budget: 05/06/14 - 02/06/15

The research objective of the proposed effort is to demonstrate and transition an autonomous, rapid determination of satellite features to be used for Threat Indication and Warning (TIN). The scope is to enhance and transition the advanced algorithms previously developed under AFRL/RV into operation in the Joint Space Operations Center (JSPOC) M...

Phase 1 STTR

Institution: University of Tennessee

Agency: National Aeronautics and Space Administration
Topic: 14-1-T12.04
Budget: 01/01/14 - 12/31/14

The research objectives of this proposal are to: (1) To adapt the thermal-fluid science procedures for the prediction of weld defects to the prediction and control of surface defects and melt pool instability during the deposition of single tracks in SLM and to control the as-deposited microstructure. (2) Utilize physics-based analysis to predic...

Phase 1 SBIR

Agency: Defense Advanced Research Projects Agency
Topic: SB122-010
Budget: 02/06/13 - 09/09/13

The research objective of this proposal is to demonstrate a semi-automated association process based upon photometric and astrometric data collected by deep space sensors for UnCorrelated Tracks (UCTs) found in and near the Geosynchronous Earth Orbit (GEO) regime. We will derive a method for parameterizing photometric data such that it can be fu...

Phase 2 SBIR

Agency: Navy
Topic: N111-077
Budget: 11/14/12 - 05/14/14

The Phase II objective is to demonstrate the vision that the reuse of knowledge gained from known designs for Direct Digital Manufacturing (DDM) of building blocks in a laboratory can be leveraged in order to produce and rapidly qualify complex DDM parts whose geometry can be expressed as union of building block geometries. The DDM of such a par...

Phase 1 SBIR

Agency: Navy
Topic: N122-123
Budget: 11/02/12 - 04/30/13

The research objective of this proposal is to perform computational alloy development to enhance the Ti-6Al-4V chemistry for direct digital manufacturing (DDM). The new alloy will be designed to attain the following attributes: (1) isotropic behavior with mechanical properties on par with the upper bins of Cast+HIP Ti-6Al-4V; (2) ability to depo...

Phase 1 STTR

Institution: The Ohio State University

Agency: Army
Topic: A12A-T004
Budget: 09/28/12 - 03/23/13

The research objective of the proposed work is to apply the foundational knowledge of ultrasonic bonding, metallic composites, microstructure transformation kinetics and material failure criteria to create a multi-scale simulation model for the optimization of ultrasonic additive manufacturing (UAM) of metallic composites. The ultrasonic fabrica...

Load More