Jentek Sensors, Inc.

110-1 Clematis Avenue Array
Waltham, MA 02453
http://[email protected]
32 Employees

SBIR Award Summary

Total Number of Awards 92
Total Value of Awards $31.1MM
First Award Date 01/01/94
Most Recent Award Date 08/22/16

92 Awards Won

Phase 1 SBIR

Agency: Army
Topic: A16-012
Budget: 08/22/16 - 02/18/17

Nondestructive evaluation of internal surfaces of holes or pipes in steel structures, such as evacuator holes in gun tubes, for the presence of surface flaws such as stress corrosion pits and cracks is a difficult task, particularly when the internal space is small, the structure is large and rapid inspection with high precision is desired. The ...

Phase 1 SBIR

Agency: National Aeronautics and Space Administration
Topic: H7.01
Budget: 06/10/16 - 12/09/16

This program addresses the need to monitor surface recession, temperature, and through-thickness properties of thermal protection system (TPS) materials. These TPS materials have unique properties for shedding the heat generated under reentry conditions to protect the integrity of the spacecraft. However, ever-increasing mission demands requir...

Phase 1 SBIR

Agency: Air Force
Topic: AF151-054
Budget: 08/21/15 - 05/23/16

ABSTRACT:This proposed SBIR will demonstrate the feasibility of delivering a revolutionary integrated inspection station for engine airfoils that uses the same advanced eddy current technology (called the JENTEK MWM-Array) to provide BOTH reliable crack detection and dimensional analysis for chord width and tip wear. By utilizing the same flexib...

Phase 2 SBIR

Agency: Department of Transportation
Topic: 13.2-PH1
Budget: 01/01/15 - 12/31/15

This proposed Phase II effort will fabricate and test a working prototype ILI tool, including a pull-test on representative samples with representative defects under representative conditions. The focus is on oil pipelines, as well as gas pipelines. This program will address some pressing, high priority needs such as reliable characterization of...

Phase 1 SBIR

Agency: Air Force
Topic: AF151-122
Budget: 01/01/15 - 12/31/15

ABSTRACT:Corrosion of aluminum aircraft structures affects remaining life and safety . When corrosion occurs below the surface of exterior panels, current inspection methods require panels to be removed and replaced. An inspection method is needed that eliminates the necessity of removing exterior aircraft panels. ?The proposed effort will devel...

Phase 2 SBIR

Agency: Air Force
Topic: AF121-214
Budget: 10/09/14 - 07/07/15

ABSTRACT: In this program we will miniaturize the wireless probe technology demonstrated in Phase I into a light-weight, wireless ET inspection system that will substantially mitigate many of the common challenges associated with conventional, wired ET. The wireless instrumentation will support conventional ET probes as well as JENTEK's MWM and...

Phase 2 SBIR

Agency: National Aeronautics and Space Administration
Topic: 12-2-H7.01
Budget: 01/01/14 - 12/31/14

This program addresses the need for non-destructive evaluation (NDE) methods for quality assessment and defect evaluation of thermal protection systems (TPS). Novel linear drive eddy current methods are proposed for NDE of carbon-based TPS materials, such as felts, rigid materials, and three dimensional woven fiber composites. Using a combinati...

Phase 1 SBIR

Agency: National Aeronautics and Space Administration
Topic: 14-1-H7.01
Budget: 01/01/14 - 12/31/14

This program addresses the need for interfacial and in-depth temperature monitoring of thermal protection systems (TPS). Novel, linear drive, eddy current methods are proposed that incorporate innovative sensor array constructs, physics-based models, and multivariate inverse methods to nondestructively assess temperatures for carbon-based TPS m...

Phase 1 SBIR

Agency: National Aeronautics and Space Administration
Topic: 14-1-H13.01
Budget: 01/01/14 - 12/31/14

An ideal NDE data acquisition and analysis tool would be a versatile and precise device capable of providing support for a large number of inspections using numerous inspection methods such as JENTEK's Meandering Winding Magnetometer (MWM) inspection, Standard Eddy Current Testing (ET), Ultrasonic Testing (UT), and other digitized NDT methodolog...

Phase 2 SBIR

Agency: Navy
Topic: N07-168
Budget: 11/27/13 - 01/30/15

This program will accelerate transitioning of high-throughput versions of JENTEK’s MWM® Array eddy-current sensors and GridStation® impedance instruments to the U.S. Navy. The proposed systems will have between 350 and 600 fully parallel impedance channels. With greater data acquisition speed from each channel and with substantial increase in th...

Load More