Ontario Engineering International

3333 Harrision Street, Unit #6
Riverside, CA 92503
http://oeico.com
6 Employees

SBIR Award Summary

Total Number of Awards 5
Total Value of Awards $1.1MM
First Award Date 01/01/01
Most Recent Award Date 03/28/02

Key Personnel

Last Name Name Awards Contact
Abbott Mr. Russell Abbott 4 Message
Sass Mr. Mark Sass 1 Message
Abbott Cary Abbott 1 Message

5 Awards Won

Phase 2 SBIR

Agency: Air Force
Topic: AF01-041
Budget: 03/28/02 - 06/29/04

In Phase 2, a Plug and Play interface will be developed capable of supporting an adaptive network architecture that can be implemented into a future Air Force Program spacecraft. This effort will include the fabrication of a simulated cube shaped micro-spacecraft with eight Plug and Play panels to demonstrate the capability of this interface. ...

Phase 1 SBIR

Agency: Navy
Topic: N01-163
Budget: 11/27/01 - 05/27/02

In Phase 1, Ontario Engineering International will perform a feasibility study to develop a high voltage cable and connector system for the ALE-55 FOTD that will significantly improve MTBF at the magazine/cartridge interface and extend the cables mission life. The current system will be analyzed and documented by generating a Failure Modes Effe...

Phase 1 SBIR

Agency: Air Force
Topic: AF01-020
Budget: 04/20/01 - 04/05/02

A fiber optic device connector will enable the development of a new generation in optical computer technology. By developing an optical interconnect that connects to the transmit and detector elements mounted in the device will improve system performance through increased data transmission rates, lower power consumption, opto-isolation of a...

Phase 1 SBIR

Agency: Air Force
Topic: AF01-041
Budget: 04/20/01 - 04/05/02

In Phase 1, a scaleable Plug and Play interface will be developed and demonstrated in a multibus architecture with 4-8 modules. These modules can be added and removed at will without any reprogramming. Any failure or latch of any module will not stop bus communication with the remaining modules. A demonstration will be conducted simulat...

Phase 1 SBIR

Agency: National Aeronautics and Space Administration
Topic: 01-1
Budget: 01/01/01 - 12/31/01

The proposed innovation is a connector with mechanical, electrical andenvironmental sealing capability that will enable the installation andremoval of major components, subassemblies and sensors by autonomous robotic vehicles allowing remote repair, replacement, and reconfiguration. The innovative features are the combination and integration of ...