Adept Systems, Inc.

21271 Waycross Drive
Boca Raton, FL 33428
10 Employees

SBIR Award Summary

Total Number of Awards 4
Total Value of Awards $1.02MM
First Award Date 03/21/00
Most Recent Award Date 11/30/01

Key Personnel

Last Name Name Awards Contact
Smith Dr. Samuel Smith 4 Message
Hinman Dr. E. J. Hinman 1 Message

4 Awards Won

Phase 1 SBIR

Agency: Navy
Topic: N01-134
Budget: 11/30/01 - 08/30/02

A detailed feasibility study of the most viable options for RF dual mode communications for enhanced survivability will be conducted. Three major configurations will be investigated and compared. Adept has developed a network analysis tool for survivable topologies that will be used to perform a survivability-cost-performance tradeoff between th...

Phase 1 STTR

Institution: Johns Hopkins University

Agency: Navy
Topic: N01T004
Budget: 07/02/01 - 01/15/02

This project seeks to demonstrate the feasibility of applying advanced model based reasoning techniques based on the Open Autonomy Kernel (OAK) to a survivable component level automation infrastructure (CLAI) developed for Naval shipboard automation applications. The key feature of the CLAI is cost effective scalable reliability through a depend...

Phase 2 SBIR

Agency: Navy
Topic: N00-085
Budget: 06/14/01 - 12/13/02

A network interface chip (NIC) that implements appropriate portions of the lower 2 layers of the ANSI 709.1 protocol (LonTalk) has been successfully designed and tested on a programmable logic device.This NIC has been successfully interfaced to a NetSilicon 32 bit ARM processor running appropriate portions of the upper layers of the 70...

Phase 1 SBIR

Agency: Navy
Topic: N00-085
Budget: 03/21/00 - 04/07/01

Embedded control networks based on the ANSI 709.1 open protocol specification will be able to leverage the rapid growth in microprocessor performance with the addition of a driver chip that handles the physical layer details. A programmable device FPGA or CPLD with a generic high speed interface to a microprocessor together with the upper layers...