Technology Assessment & Transfer, Inc.

133 Defense Highway, Suite 212 Array
Annapolis, MD 21401
40 Employees

SBIR Award Summary

Total Number of Awards 138
Total Value of Awards $33.1MM
First Award Date 01/01/85
Most Recent Award Date 06/13/16

138 Awards Won

Phase 1 SBIR

Agency: Department of Energy
Topic: 24
Budget: 06/13/16 - 03/12/17

Secondary particle beams require beam windows that isolate the target (usually in air) from the primary particle beam vacuum. Advanced beam window solutions are needed that can withstand anticipated increases in beam power and intensity that will result in higher thermal shock on the window and increased oxidative erosion rates on the air-side c...

Phase 1 STTR

Institution: Southwest Research Institute

Agency: Navy
Topic: N16A-T005
Budget: 05/20/16 - 12/30/16

Technology Assessment and Transfer will demonstrate the potential of novel, low friction and low wear coatings that are capable of providing long term durability for air cycle machine foil bearings. A systematic approach with a high probability of success includes the following: unique low friction, wear resistant alloys and lubricating ceramic ...

Phase 2 SBIR

Agency: Department of Defense
Topic: SOCOM14-002
Budget: 01/07/16 - 01/07/17

Transparent armor (TA) systems represent a substantial portion of the armor weight allocation for many ground vehicle platforms, and weigh substantially more than opaque ceramic solutions designed for the same threat. Lighter-weight transparent armor solutions that maintain or improve on the ballistic capability compared to current generation re...

Phase 1 SBIR

Agency: Department of Health & Human Services
Topic: PA-14-071
Budget: 12/01/15 - 05/31/16

? DESCRIPTION (provided by applicant): In this Phase I SBIR project, Technology Assessment & Transfer, Inc. (TA&T) and their collaborator propose development of ceramic additive manufacturing (aka 3D-printing) for production of high performance ceramic dental restorations in the dental laboratory environment. A ceramic additive manufacturing ...

Phase 1 SBIR

Agency: Navy
Topic: N152-104
Budget: 10/29/15 - 04/27/16

Technology Assessment & Transfer, Inc. (TA&T) proposes a slip casting process to manufacture near-net shaped conformal spinel electro-optic windows. Slip casting is a ?wet? process that enables fabrication of very homogeneous and high green density components. A homogeneous green structure creates very predictable shrinkage characteristics which...

Phase 1 SBIR

Agency: Defense Logistics Agency
Topic: DLA152-003
Budget: 09/14/15 - 09/13/16

In this Phase I SBIR project TA&T will use ceramic stereolithography to fabricate integrally cored shells for investment cast turbine airfoils with the goals of demonstrating dimensional accuracy specifications can be met and demonstrating castability of a legacy airfoil. The application target will be advanced high pressure turbine (HPT) airfoi...

Phase 1 STTR

Institution: University of Cincinnati

Agency: Navy
Topic: N15A-T019
Budget: 07/06/15 - 01/06/16
PI: Todd Heil

Technology Assessment & Transfer, Inc. and subcontractors propose novel, high performance additive manufactured (AM) heat exchangers for military systems. The AM process will allow for conformal, lightweight designs that optimize use of available space. Design and modeling efforts in Phase I will identify enhanced heat transfer surfaces compatib...

Phase 2 SBIR

Agency: Navy
Topic: N132-125
Budget: 05/21/15 - 05/18/17

The Navy has critical and enabling needs for large, strong transparent windows for electro-optical sensor applications on surface vessels, subsurface vessels and airborne systems that are currently beyond the state-of-the art. The hardness, erosion resistance, and broadband transparency of transparent spinel coupled with large size manufacturing...

Phase 1 STTR

Institution: Montana State University

Agency: Army
Topic: A14A-T011
Budget: 09/15/14 - 03/10/15

This STTR project seeks to overcome the performance limitations of experimental sulfur tolerant SOFC materials by combining two elements of efficient SOFC design: 1) micro-tubular arrays (OD

Phase 1 SBIR

Agency: Air Force
Topic: AF141-151
Budget: 07/01/14 - 03/27/15

ABSTRACT: In this Phase I SBIR project TA&T will use ceramic stereolithography to fabricate engineered molds for investment cast turbine airfoils with the goals of reduced dimensional and metallurgical variability, finer cast features, and improved yield. The application target will be advanced high pressure turbine (HPT) airfoils cast in singl...

Load More