Dynatech Engineering, Inc.

1830 Sierra Gardens Drive Suite 30
Roseville, CA 95661
http://www.dynatechengr.com
46 Employees

SBIR Award Summary

Total Number of Awards 9
Total Value of Awards $2.49MM
First Award Date 04/05/96
Most Recent Award Date 08/22/13

Key Personnel

Last Name Name Awards Contact
Cantor Mr. Frank J. Cantor 3
Greenhill Mr. Lyn M. Greenhill 6 Message

9 Awards Won

Phase 1 SBIR

Agency: Air Force
Topic: AF131-163
Budget: 08/22/13 - 05/26/14

ABSTRACT: To provide improved life prediction estimates for rolling element bearings used in gas turbines and general rotating machinery, an update to the lubricant traction, heat generation, and life calculation methodology currently incorporated in a commercial-of-the-shelf (COTS) analysis program is proposed. Existing analysis tools are base...

Phase 1 SBIR

Agency: Army
Topic: A06-233
Budget: 11/20/06 - 10/22/07

Military vehicle cooling systems must operate over a broad temperature range in hostile environments. The fans used in these systems are large, heavy, and require over 100 hp. These fans are usually driven by hydraulics or directly from a power take-off on a gear box. Operating speeds are limited by these drive technologies. Using a variable spe...

Phase 2 SBIR

Agency: Army
Topic: A02-227
Budget: 09/23/04 - 09/23/06

Air Cleaner Scavenging Blower Motors (ACSBM) are required to operate in heavy dust concentrations. The new self-cleaning air cleaners (SCAC) expose the ACSBM to even longer periods of time in these severe environments. Improving the ACSBM''s tolerance to dust erosion will enable the SCAC to operate for longer periods of time before clogging.

Phase 2 SBIR

Agency: Air Force
Topic: AF03-171
Budget: 05/17/04 - 09/17/06

To address the current separation between bearing analysis and rotor response calculations, a combined computational tool will be developed to couple the rotor-bearing system more directly. This tool will enable the complete thermo-mechanical analysis of rotating machinery structures by combining an advanced representation of rotor geometry wit...

Phase 1 SBIR

Agency: Air Force
Topic: AF03-171
Budget: 06/02/03 - 03/02/04

To address the current separation between bearing analysis and rotor response calculations, a combined computational tool is proposed to be developed that couples the rotor-bearing system more directly. This tool provides for the complete thermo-mechanical analysis of rotating machinery structures by combining an advanced representation of roto...

Phase 1 SBIR

Agency: Army
Topic: A02-227
Budget: 12/27/02 - 11/10/03

Air cleaner scavenging blower motors (ACSBM)are required to operate in heavy dust concentrations. The new self-cleaning air cleaners (SCAC) expose the ACSBM to even longer periods of opration in these severe environments. Improving the ACSBM's tolerance to dust erosion will enable the SCAC to operate for longer periods of time without clogging. ...

Phase 1 SBIR

Agency: Air Force
Topic: AF00-207
Budget: 03/27/00 - 12/27/00

To replace traditional rolling element bearings and eliminate liquid lubricants used in midsize gas turbine engines, a unique concept is proposed - the Hydrostatic Pivoted Pad Bearing, or HyPad. This bearing consists of several pivoting pads, to provide misalignment and good load distribution, that are constructed from a self-lubricating materi...

Phase 2 SBIR

Agency: Air Force
Topic: AF96-171
Budget: 01/06/98 - 04/04/99

To enhance the commericla viability of FEMRDYN, the computer code created and demonstrated in Phase I, an empirical validation project is proposed in Phase II of this SBIR. A series of component and system test rig modified to simulate normal and anomalous operation. Test results will be compared to the analytical predictions, and if necessar...

Phase 1 SBIR

Agency: Air Force
Topic: AF96-171
Budget: 04/05/96 - 01/05/97