Sheridan Solutions LLC

745 Woodhill Drive
Saline , MI 48176

SBIR Award Summary

Total Number of Awards 6
Total Value of Awards $2.62MM
First Award Date 06/17/15
Most Recent Award Date 04/19/16

Key Personnel

Last Name Name Awards Contact
Sheridan John Sheridan 12 Message

6 Awards Won

Phase 2 SBIR

Agency: National Aeronautics and Space Administration
Topic: Z6.01
Budget: 04/19/16 - 04/18/18

The goal of this Phase II SBIR program is to demonstrate the application of Ultrasonic Additive Manufacturing (UAM) solid state metal 3D printing to create new and innovative of metal matrix composites for selective reinforcement and lightweighting. Our intent is to enable Space Launch System structures with superior mechanical properties and in...

Phase 2 SBIR

Agency: National Aeronautics and Space Administration
Topic: H5.03
Budget: 04/19/16 - 04/18/18

This Phase II development program will utilize a novel new 3D printing process to produce multifunction aluminum parts with integrated health monitoring sensors. In particular, Ultrasonic Additive Manufacturing will be used to embed optical fiber strain sensors anywhere in a metal part that can subsequently be used for structural health monitori...

Phase 2 SBIR

Agency: National Aeronautics and Space Administration
Topic: S3.07
Budget: 04/18/16 - 04/17/18

This Phase II development program will utilize a novel new 3D printing process to produce high performance heat exchangers embedded in CubeSat structures with integrated temperature monitoring sensors. The embedded heat exchanger is part of a multifunctional three dimensional CubeSat structure that will simultaneously accommodate thermal and mec...

Phase 1 SBIR

Agency: National Aeronautics and Space Administration
Topic: S3.07
Budget: 06/17/15 - 12/17/15

The goal of this program is to demonstrate the use of Ultrasonic Additive Manufacturing (UAM) to 3D print aluminum structural panels with integrated thermal management passages. This includes pumped integrated heat exchangers for fluid loops, integrated heat pipes, and integrated wick systems. By combining two functions (structure/thermal) it wi...

Phase 1 SBIR

Agency: National Aeronautics and Space Administration
Topic: H5.03
Budget: 06/17/15 - 12/17/15

The goal of this Phase I SBIR program is to demonstrate the use of Ultrasonic Additive Manufacturing (UAM) solid state metal 3D printing to manufacture multifunctional structural components with embedded sensors such as strain gauges, break wires, and thermocouples. Specifically, this Phase I SBIR effort will demonstrate technical feasibility an...

Phase 1 SBIR

Agency: National Aeronautics and Space Administration
Topic: Z6.01
Budget: 06/17/15 - 12/17/15

The goal of this Phase I SBIR program is to demonstrate the use of Ultrasonic Additive Manufacturing (UAM) solid state metal 3D printing to create new and innovative materials that enable Space Launch System structures with superior mechanical properties and increased reliability, and validate these advancements with third party testing. Specifi...