Euclid Techlabs, Llc

5900 Harper Rd # 102
Solon, OH 44139

SBIR Award Summary

Total Number of Awards 70
Total Value of Awards $35.2MM
First Award Date 01/01/02
Most Recent Award Date 06/12/17

Key Personnel

Last Name Name Awards Contact
Kanereykin A. D. Kanereykin 1 Message
Kanereykin A.d. Kanereykin 2 Message
Kanareykin A. d. Kanareykin 11 Message
Kanayerkin A. d. Kanayerkin 1 Message
Jing Chunguang Jing 15 Message
Schoessow Paul Schoessow 4 Message
Butler James Butler 2 Message
Antipov Sergey Antipov 10 Message
Auble Dave Auble 1 Message
Baryshev Sergey Baryshev 4 Message
Qiu Jiaqi Qiu 2 Message
Dunay David Dunay 53 Message
Jabotinski Vadim Jabotinski 1 Message
Kanareykin Alex Kanareykin 23 Message

70 Awards Won

Phase 1 SBIR

Agency: Department of Energy
Topic: 02a
Budget: 06/12/17 - 03/11/18

Beam-driven wakefield acceleration is one of the most promising advanced accelerator concepts. With this approach, the main beam is accelerated by absorbing the energy from a drive beam, which has a lower kinetic energy, but a much higher current. For efficient acceleration, it is important to shape the drive beam axially, to increase the so-cal...

Phase 1 SBIR

Agency: Department of Energy
Topic: 23a
Budget: 06/12/17 - 03/11/18

Conventional traveling wave or pi-phase advance standing wave structures use coupling of the microwave power through the beam pipe. This feature constrains the cavity shunt impedance (efficiency) to relatively small values. As microwave power flows through the accelerating cells in such structures, the probability of breakdown in high gradient o...

Phase 1 SBIR

Agency: Department of Energy
Topic: 24a
Budget: 06/12/17 - 03/11/18

The cost of the accelerating waveguide in modern medical accelerators and industrial linacs is substantial. This comes to no surprise as the accelerating waveguide is a set of diamond – turned copper resonators brazed together. Such a multistep manufacturing process not only expensive, but also prone to manufacturing errors, which decrease the p...

Phase 1 SBIR

Agency: Department of Energy
Topic: 24
Budget: 06/13/16 - 03/12/17

High-average current high-quality electron beams are imperative for high-power RF accelerators used in various energy and environmental applications in industry, medicine, and national security as well as for advanced existing and future accelerator systems such as PIP II, particle colliders (eRHIC BNL) for cooling high-energy proton, ion, and h...

Phase 2 SBIR

Agency: Department of Energy
Topic: 05b
Budget: 04/11/16 - 04/10/18

Next generation light sources, diffraction-limited storage rings, and high repetition rate free electron lasers will significantly increase the average brightness of the generated X-ray beams. These machines will require X-ray refractive optics with precise dimensional control and smooth surfaces that are capable of handling large heat loads. ...

Phase 2 SBIR

Agency: Department of Energy
Topic: 24d
Budget: 04/11/16 - 04/10/18

Finding simple solutions to electron injection into superconducting radio frequency (SRF) accelerators is a long standing problem. While energies of 30-50 MeV are achievable by SRF technology, finding an electron source, able to survive under MW electric loads and provide an average current of 1-10 mA, is important. Meeting these requirements wo...

Phase 2 SBIR

Agency: Department of Energy
Topic: 07a
Budget: 04/11/16 - 04/10/18

Currently, space-time resolution (STR) in the range 10-21 to 10-22 m∙s is available exclusively at free electron laser facilities, or by a few laser microscopes based on high harmonic generation. In practice, these tools have limited accessibility due to exorbitant equipment costs or meager beam time allocations. Because such record S...

Phase 1 SBIR

Agency: Department of Energy
Topic: 27a
Budget: 06/08/15 - 03/07/16
PI: Jiaqi Qiu

Pulse compression is a method of increasing the peak power of the microwave pulse at the expense of its length. Pulse compression had been first realized at SLAC, resulting in doubling the energy of the electron beam, hence the name SLED, SLAC energy doubler. Over the years a number of pulse compressors had been demonstrated with some being bulk...

Phase 1 SBIR

Agency: Department of Energy
Topic: 32e
Budget: 06/08/15 - 03/07/16
PI: Jiaqi Qiu

To reduce the risk of radioactive incidents, long-term corrosion and creep of post-tension reinforcement tendons in containment buildings, corrosion of liners for the containment building, and corrosion of liners in spent fuel pools need to be monitored. Industrial radiography is the most accurate non-destructive testing method, however it requi...

Phase 2 SBIR

Agency: Department of Energy
Topic: 30a
Budget: 04/06/15 - 04/05/17

Linear colliders based on two-beam wakefield acceleration have an intrinsically modular design. A fundamental requirement of two-beam wakefield acceleration that has yet to be demonstrated is the staging of sequential accelerating modules. For a successful staging demonstration two key things have to be addressed: drive beam separation and the t...

Load More