SOMMER MATERIALS RESEARCH, INC.

587 North Main Street
North Salt Lake, UT 84054

SBIR Award Summary

Total Number of Awards 6
Total Value of Awards $1.05MM
First Award Date 01/01/02
Most Recent Award Date 01/01/14

Key Personnel

Last Name Name Awards Contact
Sommer Jared Sommer 7 Message

6 Awards Won

Phase 1 SBIR

Agency: National Science Foundation
Topic: BC-2013
Budget: 01/01/14 - 12/31/14

This Small Business Innovation Research Phase I project will incorporate thermochromic pigments into inorganic coatings to be used as a replacement for colored clay-coatings on roofing shingle granules. This novel inorganic coating will turn dark in low temperatures and light at higher temperatures, to absorb solar heat in the winter and reflect...

Phase 1 SBIR

Agency: National Science Foundation
Topic: 2007
Budget: 01/01/07 - 12/31/07

This Small Business Innovation & Research (SBIR) Phase I project offers a novel approach for producing a hard, uniform coating on the surface of lightweight aluminum. The technique uses a modified ""micro-arc"" approach for applying protective ceramic coatings that are much more uniform, denser and harder than conventional micro-arc approaches....

Phase 1 SBIR

Agency: Department of Energy
Topic: 2006
Budget: 01/01/06 - 12/31/06

Although recent pollution-control measures have successfully reduced NOX and mercury in flue emissions during coal combustion, these measures have led to a substantial increase in the amount of unused fly ash containing high carbon levels. The Portland cement industry, the largest consumer of fly ash, can only utilize fly ash with loss-on-ignit...

Phase 2 SBIR

Agency: National Science Foundation
Topic: 2004
Budget: 01/01/04 - 12/31/04

This Small Business Innovation Research Phase II project will focus on developing more efficient semiconductor packaging materials, which is one of the key challenges of the electronics industry where increasing power and reduced size of integrated circuits is creating heat dissipation challenges. Most epoxy molding compounds used to

Phase 1 SBIR

Agency: National Science Foundation
Topic: 2004
Budget: 01/01/04 - 12/31/04

This Small Business Innovation Research (SBIR) Phase I will develop a novel method to fabricate low-cost foamed aluminum materials that will exhibit high-energy absorption capability, high strength-to-weight and stiffness-to-weight ratios. There has been a significant interest in porous metal foams for use in the automotive, marine, and aerospac...

Phase 1 SBIR

Agency: National Science Foundation
Topic: 2002
Budget: 01/01/02 - 12/31/02

This Small Business Innovation Research (SBIR) Phase I Project will investigate the feasibility