Hy-tek Manufacturing Co., Inc.

1998 Bucktail Lane Array
Sugar Grove, IL 60554
http://www.hytekmfg.com
38 Employees

SBIR Award Summary

Total Number of Awards 14
Total Value of Awards $4.66MM
Active Awards 1 valued at $500K
First Award Date 08/24/04
Most Recent Award Date 09/26/16

Key Personnel

Last Name Name Awards Contact
Jude Mr. Mr. John Jude 1 Message
Jude John Jude 10 Message
Audet Jack Audet 1
Bastian John Bastian 5 Message
Samardzija William Samardzija 1 Message
Bowman Courtenay Bowman 1 Message

14 Awards Won

Phase 2 SBIR Active

Agency: Navy
Topic: N142-085
Budget: 09/26/16 - 12/25/18
PI: John Jude

During Phase I work under MARCORSYSCOM Contract Number M67854-15-C-6512, HMC performed engineering design work, material selection, prototype fabrication, LS Dyna based Finite Element Analysis (FEA) and performance optimization of an innovative suspension helmet liner for the United States Marine Corps (USMC) Enhanced Combat Helmet (ECH). The pr...

Phase 2 SBIR

Agency: Army
Topic: A11-045
Budget: 08/31/16 - 02/28/17
PI: John Jude

HMCs Phase II work involved successful development and performance validation of a PFG prototype capable of consistently producing > 90% PO dissemination yield and gFOM higher than that of the currently deployed M106 obscurant grenade. Of particular importance in the Phase II design cycle was development of a PFG that excludes the use of dangero...

Phase 1 SBIR

Agency: Army
Topic: A16-063
Budget: 08/01/16 - 01/31/17

To overcome the limitations, costs, and risks associated with built in place wooden platforms, Hy-Tek Manufacturing Co. Inc. herein proposes an innovative approach to drastically increase the capabilities of raised platforms used for expeditionary shelters on forward operating bases. This approach involves the development of a Modular Expedition...

Phase 1 SBIR

Agency: Army
Topic: A152-098
Budget: 03/31/16 - 09/30/16
PI: John Jude

Non-traditional interior roof military vehicle impact injury prevention technologies address the challenge to provide warfighter survivability, allowing them to complete their mission, by preventing impact related injuries such as skull fractures and neck injuries, otherwise incurred during underbody blast, crash and rollover events. The solutio...

Phase 2 SBIR

Agency: Army
Topic: A13-080
Budget: 05/14/15 - 05/13/16
PI: John Jude

During its Phase I SBIR research and development efforts Hy-Tek Mfg. Co. Inc. (HMC) designed, fabricated and demonstrated an innovative technology devised specifically to achieve the U.S. Army's CSS water vapor reclamation goals, including: CSS Water Va

Phase 2 SBIR

Agency: Army
Topic: A11-045
Budget: 09/27/13 - 01/26/16
PI: John Jude

The use of high explosive powder obscurant (PO) grenades can cause serious injury and death as well as unwanted collateral damage in the form of incendiary destruction. U.S Army's objective is to greatly mitigate these hazards and improve the overall powder yield, dissemination and performance of PO grenades while eliminating the use of traditio...

Phase 2 SBIR

Agency: Navy
Topic: N111-047
Budget: 07/16/13 - 04/16/14
PI: John Jude

HMC s approach to Phase I HLRB roller bearing design was to achieve separation of the radial and axial functions of the bearing so as to enable axial bearing movement independent of bearing rotation. HMC s rationale for this approach was that the delineation of axial and radial loads will ensure that each load bearing member can withstand the st...

Phase 1 SBIR

Agency: Navy
Topic: N122-129
Budget: 10/16/12 - 04/16/13

Hy-Tek Manufacturing Co. Inc. (HMC) proposes a superior renovation solution for the DDG-51 class ships retractable mooring fixtures; namely bitt and chock assemblies. There are two major areas where technology advancements can be made that not only provide reliable bitts and chocks for use onboard U.S. Navy ships, but also have implications for ...

Phase 1 SBIR

Agency: Navy
Topic: N111-047
Budget: 08/12/11 - 02/12/12
PI: John Jude

The High Load Roller Bearing (HLRB) roller for severe service offers a zero-maintenance reliable replacement for bearing sets currently utilized on DDG-51 helicopter bay hanger doors. Enhanced seal design prevents the ingress of liquids and particulates even under extreme environmental conditions and extreme off axis loading. Intended as a direc...

Phase 1 SBIR

Agency: Air Force
Topic: AF103-246
Budget: 06/13/11 - 03/12/12

ABSTRACT: The purpose of this proposal is to demonstrate the feasibility of reducing fuel consumption by efficiently providing single phase 120VAC power distribution that is automatically load balanced over existing 240VAC three phase generator produced power. This device, coined the Automatic Load Balancing Device (ALBD), will supply single pha...

Load More