Manufacturing And Technology Conversion Int'l, Inc

6001 Chemical Road
Baltimore, MD 21226

SBIR Award Summary

Total Number of Awards 22
Total Value of Awards $4.88MM
First Award Date 01/01/83
Most Recent Award Date 01/01/04

Key Personnel

Last Name Name Awards Contact
Mansour Dr. Momtaz N. Mansour 9
Warren Dr. David W Warren 2
mansour Amal m mansour 8 Message
Durai-swamy Dr. Durai-swamy 1
Chandran Dr. Ravi Chandran 6 Message
Chandran Dr. R Chandran 1

22 Awards Won

Phase 2 SBIR

Agency: Department of Energy
Topic: 2004
Budget: 01/01/04 - 12/31/04

72703-There is a national interest in the efficient, economical and enhanced utilization of biomass as an energy resource. Consequently, there is a need for the development of a feedstock-flexible, modular, biomass drying system that can cater to the local market drivers in an efficient, safe and environmentally responsible manner. This project...

Phase 1 SBIR

Agency: Department of Energy
Topic: 2003
Budget: 01/01/03 - 12/31/03

72703S03-I There is a national interest in the efficient and economical utilization of biomass as an energy resource. Consequently, there is a need for the development of a feedstock-flexible, modular, biomass drying system that can cater to local market drivers in an efficient, economical, safe, and environmentally responsible manner. This p...

Phase 2 SBIR

Agency: Department of Energy
Topic: 1999
Budget: 01/01/99 - 12/31/99

Phase 1 SBIR

Agency: Department of Energy
Topic: 1999
Budget: 01/01/99 - 12/31/99
PI: Unavailable

Not Available The goal of this Phase I effort is the design of a flexible Codec (COder/DECoder) based upon the theory in recent literature termed Turbo Codes . The Codec shall be applicable for ground base equipment as well as be space qualified to enable incorporation into future space segments. The objective of this multi-phase SBIR is to de...

Phase 1 SBIR

Agency: Department of Energy
Topic: 1998
Budget: 01/01/98 - 12/31/98

50639-98-I

Phase 1 SBIR

Agency: Department of Energy
Topic: 1993
Budget: 01/01/93 - 12/31/93

AN APPROACH TO SIGNIFICANTLY ENHANCING THE EFFICIENCY, ECONOMY AND ENVIRONMENTAL CONTROL CAPABILITIES OF A COMBINED-CYCLE, COAL-FIRED POWER PLANT IS TO APPLY PRESENTLY AVAILABLE PULSE COMBUSTION TECHNOLOGY TO A SYSTEM THAT CAN USE STATE-OF-ART MATERIALS, COMPONENTS, AND SUB-SYSTEMS. THE SYSTEM CONSISTS OF A HIGH-TEMPERATURE AIR HEATER FOR RAISIN...

Phase 1 SBIR

Agency: Environmental Protection Agency
Topic: 1992
Budget: 01/01/92 - 12/31/92

INCREASED PUBLIC OPPOSITION TO PROPOSED PERMITS FOR LAND-BASED INCINERATOR FACILITIES AND THE GROWING MARKET TREND FOR THERMAL DESTRUCTION OF HAZARDOUS WASTES HAVE RESULTED IN A NEED FOR INNOVATIVE, COST-EFFECTIVE, AND RELIABLE TRANSPORTABLE INCINERATOR FACILITIES. THIS PROJECT PROPOSES TO ADAPT A PULSED ATMOSPHERIC FLUID-BED COMBUSTION SYSTEM F...

Phase 1 SBIR

Agency: Department of Energy
Topic: 1992
Budget: 01/01/92 - 12/31/92
PI: Unavailable

THIS PROJECT ADDRESSES A NOVEL APPROACH FOR DEVELOPING AN EFFICIENT AND COST-EFFECTIVE PULSE JET ATOMIZER FOR ATOMIZATION OF COAL-BASED MIXTURES, BY UTILIZING A MODERATE FREQUENCY (1,500 TO 3,000 HZ), HIGH INTENSITY OSCILLATING FIELD (140 TO 165 DB) SUPERIMPOSED ON A STEADY JET TO PROVIDE THE REQUIRED ENERGY. IN PHASE I, SPECIFIC EXPERIMENTS ARE...

Phase 1 SBIR

Agency: Department of Energy
Topic: 1992
Budget: 01/01/92 - 12/31/92
PI: Unavailable

MODULARIZING THE CALTECH SILICA-GLASS MEMBRANE FOR HYDROGEN SEPARATION OFFERS AN ECONOMIC AND EFFICIENT ALTERNATIVE TO THE EXISTING CARBON DIOXIDE (CO2) AND HYDROGEN SULFIDE (H2S) SEPARATION TECHNIQUES FOR SYNGAS PURIFICATION. THE CREDIBILITY AND POTENTIAL OF CALTECH'S MEMBRANE TECHNOLOGY HAS BEEN WELL ESTABLISHED. THE INORGANIC MEMBRANES FORMED...

Phase 1 SBIR

Agency: Environmental Protection Agency
Topic: 1992
Budget: 01/01/92 - 12/31/92

THIS PROJECT IS FOCUSED UPON RESOLVING THE INCOMPLETE COMBUSTION PROBLEMS ENCOUNTERED IN RESIDENTIAL WOOD STOVES DUE TO LOW COMBUSTION TEMPERATURES, UNCONTROLLED AIR DRAFT RATES, VARIABILITY IN WOOD FUEL AND MOISTURE. A PROTOTYPE RETROFIT KIT IS TO BE FABRICATED AND TESTED TO DEMONSTRATE THE FEASIBILITY OF THE DEVICE AS AN INEXPENSIVE, EASILY IN...

Load More