International Mezzo Technologies, Inc.

7167 Florda Blvd
Baton Rouge, LA 70806
18 Employees

SBIR Award Summary

Total Number of Awards 22
Total Value of Awards $6.68MM
First Award Date 01/01/01
Most Recent Award Date 06/01/13

Key Personnel

Last Name Name Awards Contact
Turner Mr. Ryan Turner 2 Message
McCandless Mr. Andrew B. McCandless 3 Message
McLean Dr. Jeffrey McLean 9
Becnel Mr. Charles J. Becnel 4
McLean Jeff McLean 2
Wang Tao Wang 1 Message
McCune Steven McCune 1 Message
Ford Sean M. Ford 1 Message
Kelly Kevin Kelly 1 Message
Giglio Anthony Giglio 1 Message

22 Awards Won

Phase 2 SBIR

Agency: Navy
Topic: N102-110
Budget: 06/01/13 - 05/31/15

The goal of this program is to develop compact, lightweight, low power thermal management systems for non-lethal weapons platforms, specifically the Radio Frequency Vehicle Stopper (RFVS) and the Active Denial Technology (ADT) system. In the Phase I effort, Mezzo designed thermal management systems for both applications which utilize Mezzo s adv...

Phase 1 SBIR

Agency: Navy
Topic: N122-128
Budget: 10/16/12 - 04/16/13

Mezzo Technologies fabricates high performance micro tube heat exchangers. In this proposal, Mezzo proposes to fabricate a heat exchanger to interface between helium, which is the working fluid used to cool a variety of superconducting components on Navy vessels in the future that will require cryogenic cooling, and cold neon gas, which is suppl...

Phase 1 SBIR

Agency: National Aeronautics and Space Administration
Topic: 11-1-X3.04
Budget: 01/01/12 - 12/31/12

Mezzo fabricates micro tube heat exchangers for a variety of applications, including aerospace, automotive racing, Department of Defense ground vehicles, economizers for ships, condensers, evaporators, liquid-liquid, liquid-air, recuperators, etc. Mezzo's expertise is designing, modeling and fabricating heat exchangers that use thousands, even...

Phase 1 SBIR

Agency: Navy
Topic: N112-164
Budget: 10/11/11 - 08/10/12

A next generation of Fan Coil Units (FCU) is proposed which utilize an intermediate temperature water supply at 68 F to meet HVAC heating and cooling loads on ships. These new next generation FCU will require active cooling (vapor compression cycles). Mezzo Technologies fabricates high performance micro tube heat exchangers. Mezzo, along with i...

Phase 1 SBIR

Agency: Navy
Topic: N102-110
Budget: 02/08/11 - 08/08/11

Mezzo Technologies fabricates high performance micro channel radiators, condensers, evaporators and Phase Change Material (PCM) heat exchangers. The attributes of Mezzo's products include high heat transfer/volume, heat transfer/weight, heat transfer/air side pressure drop, and unique geometry options. Directed Energy cooling systems can utili...

Phase 2 SBIR

Agency: Defense Advanced Research Projects Agency
Topic: SB082-063
Budget: 11/04/10 - 11/03/12

Mezzo fabricates high performance micro tube heat exchangers. In this proposal, extremely light weight versions of these heat exchangers made from polymers will be examined for use on high altitude unmanned air vehicles (UAVs). The anticipated weight of these heat exchangers is expected to be less than 25% that of a conventional (i.e. plate-f...

Phase 2 SBIR

Agency: Army
Topic: A08-153
Budget: 03/25/10 - 03/25/12

Mezzo fabricates high performance micro tube heat exchangers. In the Phase I program, Mezzo explored substituting the stainless steel micro tubes that typically have been used with polymer micro tubes. Polymer micro tube heat exchangers have significant potential advantages over currently used metal plate-fin heat exchanger technologies. Specifi...

Phase 2 SBIR

Agency: Navy
Topic: N07-163
Budget: 01/06/10 - 01/06/12

The objective of this program is to develop techniques to reduce engine cooling system noise levels of the Expeditionary Fighting Vehicle (EFV). Mezzo s approach is to redesign the engine cooling heat exchangers (LTC, HTC, fuel cooler, and condenser) using Mezzo s heat exchanger technology to reduce the overall heat exchanger pressure drop and t...

Phase 2 SBIR

Agency: Navy
Topic: OSD08-EP7
Budget: 09/21/09 - 09/30/11

The goal of this proposal will be to demonstrate the viability of a micro tube heat exchanger in an HVAC application on board a Navy vessel. Specifically, a product design sequence will be completed, resulting in R-134a economizer that will provide volume and weight savings over existing technologies. The program will include tasks to test the s...

Phase 1 SBIR

Agency: Missile Defense Agency
Topic: MDA08-049
Budget: 03/27/09 - 09/27/09

A system to provide either continuous 15 kW cooling at -15 C or 100 kW cooling at 20 C is described that is very simple in terms of using only light weight micro channel heat exchangers, two constant speeed pumps (one of which is working at any moment) and some control valves. The system does not utilize a refrigerant, nor a power-consuming co...

Load More