Hybrid Plastics

55 W. L. Runnels Industrial Dr.
Hattiesburg, MS 39401
http://www.hybridplastics.com
17 Employees

SBIR Award Summary

Total Number of Awards 17
Total Value of Awards $5.25MM
First Award Date 04/01/01
Most Recent Award Date 02/16/15

Key Personnel

Last Name Name Awards Contact
Lichtenhan Dr. Joseph D. Lichtenhan 13 Message
Schwab Dr. Joseph J. Schwab 2 Message
Hagstrom Mr. Carl Hagstrom 3 Message
Lichtenhan Joseph Donald Lichtenhan 3

17 Awards Won

Phase 2 SBIR

Agency: Air Force
Topic: MDA04-036
Budget: 02/16/15 - 05/16/17

ABSTRACT:Specialty elastomers, such as hydrogenated acrylonitrile-butadiene rubber (HNBR) and fluoroelastomer (FKM), are widely utilized as high performance seals in numerous aerospace vehicles and components. The elastomer sealing industry and its products are primarily based on a limited pool of feedstocks that were last advanced in the 1970's...

Phase 1 SBIR

Agency: Department of Energy
Topic: 09 B-2012
Budget: 01/01/12 - 12/31/12

Current energy storage devices have energy densities that are barely sufficient for low cost electric-vehicles and rely on lithium ion batteries that use flammable, unsafe, liquid electrolytes. However, in order to replace liquid electrolyes in lithium batteries for hybrid electric power train systems, solid polymer electrolytes, which have the ...

Phase 1 STTR

Institution: University of Southern Mississippi

Agency: Navy
Topic: N11A-T014
Budget: 06/27/11 - 04/27/12

The proposed effort will utilize lithiated POSS in synergistic combination with commercial phosphates to achieve comparable processing characteristics and superior flame retardancy, smoke and toxicity to that of Derakane® 510A. The POSS-phosphate synergist package will be formulated into a Hydrex® nonhalogenated vinylester resin and superior mec...

Phase 1 SBIR

Agency: Office of the Secretary of Defense
Topic: OSD10-EP6
Budget: 12/20/10 - 06/20/11

Polyhedral silsesquioxanes (POSS) will be modified using chloromethylation of aromatic POSS cages. These cages will then be co-cast, using solvent, with chloromethylated polysulfones and subsequently quaternized with monofunctional and difunctional trialkylamines in order to render crosslinked films containing the cage-structures. Subsequent al...

Phase 1 SBIR

Agency: Navy
Topic: N101-085
Budget: 09/21/10 - 07/26/11

The proposed effort comprises a treatment combination using the platelet binding hemostatic capability of Nanoscopic Chemicals known as POSS trisilanols in combination with hyaluronic acid media, and antibiotic drugs in liquid and foam form. Mechanistically, liquid POSS trisilanols are injectable and serve to bind platelets to immediately stop b...

Phase 1 SBIR

Agency: Air Force
Topic: AF093-092
Budget: 03/22/10 - 12/22/10

The recent development of colorless, transparent polyimides provides a break-out solution for the operational and environmental protection of thin multijunction solar cells. The incorporation of polyhedral oligomeric silsesquioxanes into the polyimide backbone renders these systems radiation hard toward proton, electron and atomic oxygen degrada...

Phase 1 STTR

Institution: University of Southern Mississippi

Agency: Navy
Topic: N06-T040
Budget: 09/11/06 - 07/10/07

This Phase I STTR proposal is to designed to utilize the fundamental properties of POSS® nanotechnology to provide a new higher Tg and fracture toughness ambient cure epoxy matrix for use in Vacuum Assist Resin Transfer Molding (VARTM) manufacturing. Nanostructured ambient cure epoxy matrices based upon Polyhedral Oligomeric Silsesquioxanes (PO...

Phase 2 SBIR

Agency: Air Force
Topic: AF05-022
Budget: 04/03/06 - 07/02/08

Hybrid Plastics proposes to develop a low cost, and versatile method for shielding commercial and military single crystal solar cells from damage against proton and electron radiation. Hybrid Plastics also proposes to develop a related coating variant for the protection of thin film photovoltaics against atomic oxygen, vacuum ultraviolet radiati...

Phase 1 STTR

Institution: University of Southern Mississippi

Agency: National Science Foundation
Topic: 2006
Budget: 01/01/06 - 12/31/06

This Small Business Technology Transfer (STTR) Phase I project will evaluate the technical and commercial feasibility of producing nanotube and nanoparticle "masterbatches" in selected high-performance thermoplastics using specifically tailored POSS components as dispersing agents. Polymer modification with carbon nanotubes and other nanoparticl...

Phase 2 SBIR

Agency: Air Force
Topic: AF02-193
Budget: 09/20/05 - 12/17/07

The successful Phase I effort to incorporate POSS into BMI resin resulted in substantial Tg and HDT improvements while reducing the cure temperature. The proposed Phase II effort will optimize the formulaiton while characterizing the full scope and range of enhancement in filament wound composite structures.

Load More