Bhtechnology, LLC

26 Firemens Memorial Drive Array
Pomona, NY 10970
http://www.bhtechnologyllc.com
5 Employees

SBIR Award Summary

Total Number of Awards 9
Total Value of Awards $2.75MM
First Award Date 12/18/03
Most Recent Award Date 04/28/16

Key Personnel

Last Name Name Awards Contact
Kain Dr. Aron Kain 8 Message
Kian Aron Kian 1 Message
Kain Milton Kain 1 Message

9 Awards Won

Phase 1 SBIR

Agency: Navy
Topic: N161-014
Budget: 04/28/16 - 10/31/16

BH Technology proposes a Form, Fit, and Function end-to-end upgrade replacement to the current DESI system. Our system uses novel technology and updated enhancements that eliminate current system obsolescence, end of life, and performance issues while reducing total cost of ownership of the system over its expected lifetime. The proposed technol...

Phase 2 SBIR

Agency: Navy
Topic: N111-038
Budget: 11/14/13 - 11/14/15

a novel family of proximity switchs is proposed based on EM technology field perturbation.This technology enables the proximity switch to be low cost, light weight, highly accurate and meets all MIL_PRF_24711B requirements. The proposed switch can be used in new NAVY vessel design as well as retrofit for end-of-life mechanical limit switches and...

Phase 1 SBIR

Agency: Navy
Topic: N111-038
Budget: 08/12/11 - 02/12/12

a novel family of proximity switchs is proposed based on EM technology field perturbation.This technology enables the proximity switch to be low cost, light weight, highly accurate and meets all MIL_PRF_24711B requirements. The prposed switch can be used in new NAVY vessel design as well as retrofit for end-of-life mechanical limit switches.

Phase 1 SBIR

Agency: Army
Topic: A10-033
Budget: 10/22/10 - 04/22/11
PI: Aron Kian

A novel transducer is proposed for the measurement of oil debris for both metallic and non-metallic particles. The transducer is compact, lightweight, and easily cleaned. The sensor operates at 350F, counts the debris particles, estimates the total mass of the debris, and indicates the debris composition.

Phase 1 SBIR

Agency: Army
Topic: A09-098
Budget: 11/12/09 - 05/12/10

A novel weigh in motion measuremetn system is proposed that does not rely on the piezoelectric effect. This system is physically felixible in composition and can accurately measure vehicles traveling at speeds from 5 to 30MPH. The system is rapidly deployable, easy to use, and readily incorporated in overall WIM and classification systems.

Phase 2 SBIR

Agency: Army
Topic: A05-176
Budget: 09/29/06 - 03/31/09

A Combat Load Assessment Device (CLAD)has been proposed based on BH Technology's Flexivibe load cell technology. The resulting scale and hand held controller are lightweight, rugged, low cost, high impact resistant and have an accuracy of 1 part in 10,000. The CLAD measures both height and weight of the individual soldier. The flexivibe load cel...

Phase 1 SBIR

Agency: Army
Topic: A05-176
Budget: 12/01/05 - 05/31/06

A Combat Load Assessment Device (CLAD)has been proposed based on BH Technology's Flexivibe load cell technology. The resulting weigh plate and controller are made out of high impact resistant, light weight polycarbonate material, are low cost and have an accuracy of 1 part in 10,000. The CLAD measures both height and weight of the individual war...

Phase 2 SBIR

Agency: Army
Topic: A03-141
Budget: 12/07/04 - 01/15/07

BHTechnology proposes the continuing prototype development of a novel thermobaric blast pressure transducer. The pressure transducer uses a combination of selected materials such as Boron Nitride, Silicon Carbide and Aluminum Nitride, novel electronic detection techniques for both frequency and phase shift measurements, and pressure sensing devi...

Phase 1 SBIR

Agency: Army
Topic: A03-141
Budget: 12/18/03 - 06/17/04

BHTechnology proposes a novel development of a thermobaric blast pressure transducer. The pressure transducer uses a combination of selected materials, novel electronic detection techniques, and pressure sensing devices.