Innovative Scientific Solutions, Inc.

7610 McEwen Road Array
Dayton, OH 45459
http://www.innssi.com
80 Employees

SBIR Award Summary

Total Number of Awards 110
Total Value of Awards $33MM
First Award Date 04/12/96
Most Recent Award Date 09/27/16

110 Awards Won

Phase 1 SBIR

Agency: Navy
Topic: N162-105
Budget: 09/27/16 - 03/30/17

Modern gas turbine engines operating in environments with high particulate concentrations face significant durability, performance, and operability challenges. Ingestion of particulate materials can cause erosion of the flow path components and particles that reaches the combustor and turbine can adhere to these components, adversely impacting t...

Phase 1 SBIR

Agency: Department of Agriculture
Topic: 8.13
Budget: 08/05/16 - 12/31/16

The spray application of pesticides, herbicides, fertilizers and growth regulators produces substantial benefits in crop yields. Aerial spray application of bulk materials offers advantages such as efficiency, speed, and access to constrained areas. However, a disadvantage with spray application is the unintended drift of spray droplets. Spray d...

Phase 1 SBIR

Agency: National Aeronautics and Space Administration
Topic: A1.08
Budget: 06/10/16 - 12/09/16

One focus of NASA aerodynamics research is enabling energy efficient flight through drag reduction technologies. A variety of drag reduction techniques have shown promise and are under investigation, including both active flow control and surface microstructure concepts. Experimental verification of the performance of any drag reduction techniqu...

Phase 2 SBIR

Agency: National Aeronautics and Space Administration
Topic: A1.08
Budget: 04/28/16 - 04/27/18

Ground-based testing resources are essential for the development of aerospace systems. While these facilities can be expensive to maintain and operate, the cost to acquire data can be significantly reduced by implementing measurement systems featuring high data capture per test while requiring limited modification or instrumentation of models. T...

Phase 2 SBIR

Agency: Air Force
Topic: AF141-228
Budget: 03/29/16 - 03/28/18

ABSTRACT:Quantitative ablation recession rate measurements of heat shield surfaces are essential for evaluating the performance of heat shield materials. Currently, these measurements are limited to two-dimensional images that focus on the nose tip regression rate. For wedge testing, recession rate is determined by comparing pre- and post-test m...

Phase 1 STTR

Institution: Stanford University

Agency: Navy
Topic: N15A-T021
Budget: 07/06/15 - 05/06/16
PI: John Hoke

The Phase I research effort proposed here is to design and demonstrate first-generation laser-absorption-based sensors for time-resolved measurements of combustion-product mass fractions and gas temperature within the detonation channels and at the nozzle exit plane of rotating-detonation-engine (RDE) systems. An important element of this work w...

Phase 1 SBIR

Agency: National Aeronautics and Space Administration
Topic: A1.08
Budget: 06/17/15 - 12/17/15

Significant advances in the use of fast responding Pressure-Sensitive Paint have recently been achieved as demonstrated by a multi-camera fast PSP test conducted in the 16 foot transonic wind tunnel at AEDC. The unsteady pressure results from this test demonstrated excellent accuracy and spatial resolution, establishing the technical readiness o...

Phase 1 SBIR

Agency: Air Force
Topic: AF151-063
Budget: 01/01/15 - 12/31/15

ABSTRACT:The goal of the proposed effort will be to demonstrate a diagnostic technique that can simultaneously measure the combustion progress variable, the flow velocity, and the fuel-to-air ratio with high spatial and temporal resolution to allow the local heat release to be determined. This approach will require the combination of two well-es...

Phase 1 SBIR

Agency: Air Force
Topic: AF151-176
Budget: 01/01/15 - 12/31/15

ABSTRACT:Heat transfer is an important quantity that remains difficult to predict using CFD. Phenomena such as transition and separation are difficult to capture with discrete sensors. Temperature-Sensitive Paint is an image-based technology that has been used for over 25 years to acquire measurements of surface temperature and heat flux in a va...

Phase 1 SBIR

Agency: Air Force
Topic: AF141-223
Budget: 07/23/14 - 04/21/15

ABSTRACT: A new sensor for the measurement of ground reaction forces that terminate into the aircraft wheel-tire interface is proposed. Current measurement methods are limited to capturing normal force values. We propose the use of a thin-film sensor based on Innovative Scientific Solutions Inc. s Surface Stress Sensitive Film (S3F). This techno...

Load More