Wilson Composite Technologies

1004 River Rock Drive, Suite 240
Folsom, CA 95630
http://www.wilsoncomposites.com
21 Employees

SBIR Award Summary

Total Number of Awards 14
Total Value of Awards $5.51MM
First Award Date 01/01/96
Most Recent Award Date 09/27/07

Key Personnel

Last Name Name Awards Contact
Wilson Mr. Brian Wilson 6 Message
Griffin Mr. Charles Griffin 2 Message
Whitehead Mr. Dave Whitehead 1 Message
Adsit Dr. Raymond Adsit 1 Message
Hender Mr. Doug Hender 2 Message
Mitchell Mr. Ron Mitchell 1 Message
Jesmont Kathy Jesmont 1 Message
Whitehead David L. Whitehead 2

14 Awards Won

Phase 2 SBIR

Agency: Missile Defense Agency
Topic: MDA05-024
Budget: 09/27/07 - 09/27/09

Wilson Composite Technologies (WCT) and its team members, including San Diego Composites, Stratton Composite Solutions, Composite Advantage and 2 Phase Technologies, propose to design and demonstrate an integrated composite structure containing a high pressure tank and the supporting structure for other components of the assembly suitable for a ...

Phase 1 SBIR

Agency: Missile Defense Agency
Topic: MDA05-024
Budget: 04/04/06 - 10/31/06

Advanced fiberous composites offer potential weight savings compared to metallic materials for application to aerospace vehicle pressure vessels. Current manufacturing processes such as wet resin or preimpregnated tow winding have significant limitations that inhibit material selection and design flexibility and subsequent weight and cost saving...

Phase 1 SBIR

Agency: Navy
Topic: N04-212
Budget: 10/28/04 - 04/29/05

This program creates the design of alight weight, composite, load bearing superstructure for surface ships. The program is supported by Bath Iron Works (BIW) as a Navy Ship contractor. BIW will supply details of structural loading and impact requirements. WCT will design an isogrid reinforced panel structure to accept the loading conditions. ...

Phase 2 SBIR

Agency: Missile Defense Agency
Topic: BMDO02-012
Budget: 10/28/03 - 02/06/06

This Phase II SBIR program accomplished a review of ten composite boss designs and reduced them to three concepts. This program will perform detailed design and development and a demonstration test of the three selected concepts and may further down select to two or one final designs. The key factors in this program are the evaluation of seali...

Phase 2 SBIR

Agency: Missile Defense Agency
Topic: BMDO02-006
Budget: 06/02/03 - 08/15/05

WCT prior experience has shown that microcracks can be generated as a liquid hydrogen composite tank wall cools from room temperature conditions down to liquid hydrogen temperature. Cycling between these temperature levels causes these cracks to grow and potentially form delaminations between the plies resulting in leak paths. This Phase II pr...

Phase 1 SBIR

Agency: Missile Defense Agency
Topic: MDA02-021
Budget: 01/06/03 - 07/05/03

This three-phase program will develop a new concept of satellite and payload mounting, structural interface, release and separation motion. A large single satellite mount will be evaluated together with a set of small satellites and scientific payloads. The payloads will be attached and locked to a composite plate structure, fabricated from a ...

Phase 1 SBIR

Agency: National Aeronautics and Space Administration
Topic: 03-1
Budget: 01/01/03 - 12/31/03

This program builds on prior R&D contracts of which some are completed and some are ongoing by Wilson Composite Technologies (WCT). The principal support area will be from a contract entitled ?Long Term Storage of Liquid Hydrogen in Space?, which has a goal of 20 year storage with a 2% boil-off loss. This program will build upon the results of t...

Phase 1 STTR

Institution: University of Dayton

Agency: Missile Defense Agency
Topic: BMDO02T-00
Budget: 06/30/02 - 06/30/03

The proposed statement of work under this SBIR effort for the Airborne Laser Program is intended to provide a significant weight saving for the storage and dispensing tanks on the airborne system. The program will utilize linerless composite technology as developed by Wilson Composite Technologies (WCT) for cryogenic storage and dispensing syst...

Phase 1 SBIR

Agency: Missile Defense Agency
Topic: BMDO02-012
Budget: 05/14/02 - 02/28/03

This program covers replacement of metallic boss and attachment rings with an all-composite version to eliminate a major weight component of solid rocket motors. These components are for attachment of solid rocket motor igniters and nozzle systems. These boss systems are critical and complex attachment components that support primary loading i...

Phase 1 SBIR

Agency: Missile Defense Agency
Topic: BMDO02-006
Budget: 05/11/02 - 02/28/03

This program explores the entire concept of microcracking of composite materials with liquid hydrogen and liquid helium where the differential from room temperature is 500º or more. The program reviews microcracking on an empirical basis using resin systems with and without fiber content. The concept of using chopped and continuous random fibe...

Load More