Webcore Technologies, Inc.

8821 Washington Church Road
Miamisburg, OH 45342
http://www.webcoreonline.com
31 Employees

SBIR Award Summary

Total Number of Awards 36
Total Value of Awards $13.4MM
First Award Date 05/13/99
Most Recent Award Date 11/07/11

36 Awards Won

Phase 1 SBIR

Agency: Navy
Topic: N112-142
Budget: 11/07/11 - 05/07/12

Use of lightweight and durable composite materials in the design and construction of the ramps for US Navy hovercrafts has the potential to make significant impact on mission capability and mobility. Lightweight ramps will increase the payload capacity, improve vehicle handling and performance, reduce fuel consumption, extend vehicle range, redu...

Phase 1 STTR

Institution: University of Dayton

Agency: Navy
Topic: N10B-T050
Budget: 01/10/11 - 08/10/11

The design of military aircraft relies heavily on honeycomb sandwich structures for the high strength and stiffness to weight ratios yet is constrained by the inability to efficiently and effectively machine and form honeycomb into complex shapes. WebCore Technologies TYCOR® fiber reinforced foam core technology delivers higher structural perfo...

Phase 1 SBIR

Agency: Air Force
Topic: AF093-202
Budget: 06/01/10 - 03/01/11

WebCore Technologies, LLC, Miamisburg, Ohio, is the developer and manufacturer of the TYCOR® family of fiber-reinforced core materials used in composite sandwich construction. TYCOR is manufactured using novel, patented fiber placement processes and equipment, which can be tailored to meet various design, manufacturing and performance requiremen...

Phase 2 SBIR

Agency: Department of Energy
Topic: 2008
Budget: 01/01/08 - 12/31/08

Wind energy has the potential of producing over 20% of the U.S. near-term electricity needs. However, reaching this potential will require an expansion of wind-turbine sites from the currently-exploited high-wind sites to lower¿wind-speed sites. In turn, this expansion will require the development of technologies and manufacturing methods tha...

Phase 1 SBIR

Agency: Department of Energy
Topic: 2007
Budget: 01/01/07 - 12/31/07

Currently, balsa and PVC foam are widely used as the core/stiffening material in the shear webs and blade surfaces of large wind turbine blades. In previous work, it has been shown that engineered Fiber Reinforced Core (FRC) materials can provide comparable stiffness and strength, while significantly reducing both cost and weight. These engine...

Phase 2 SBIR

Agency: Air Force
Topic: AF05-278
Budget: 10/18/06 - 09/17/08

Composite wall panels and composite shelters are becoming increasingly used in habitable military transportable structures. WebCore Technologies, Inc. has been developing a TYCOR based shelter panel technology to meet the stringent performance requirements of the ISO Composite Tactical Shelter (CTS). The increasing use of composites in setting...

Phase 2 SBIR

Agency: Air Force
Topic: AF05-270
Budget: 09/20/06 - 09/19/08

The U.S. Air Force has a need to deploy fixed site composite shelters (FSCS) in remote locations to house highly sensitive electronics and communication equipment. Lightweight composite shelters can offer significant benefit due to ease of installation and minimal maintenance. The current composite shelters being deployed have several drawbacks ...

Phase 1 STTR

Institution: Old Dominion University

Agency: Navy
Topic: N06-T021
Budget: 08/01/06 - 05/31/07

WebCore proposes to explore the incorporation of newer, tougher resins and nano-fibers into fiber reinforced composites (FRC) in order to provide highly durable, abrasion-resistant materials. WebCore's FRC, TYCOR, is a lightweight, high performance structural material that can be tailored to exacting requirements and complex shapes. Through the...

Phase 1 SBIR

Agency: Air Force
Topic: AF06-347
Budget: 08/01/06 - 05/26/07

WebCore Technologies proposes to develop an integrated, multifunctional floor system for composite shelters that will incorporate both structural and functional features. Using an integrated structural floor system will remove the need for the metal subfloor supports. WebCore anticipates that an integrated floor system with no weight penalty an...

Phase 2 SBIR

Agency: Navy
Topic: N04-091
Budget: 08/04/05 - 02/28/08

The primary objective of this proposal is to design and fabricate a durable, lightweight replacement for the current Personnel Transport Module (PTM) used on the Navy LCAC vehicle. WebCore Technologies has demonstrated through the course of the Phase I program the design of TYCOR composite structural panels able meet the load and weight require...

Load More