X-wave Innovations, Inc.

407 Upshire Circle Array
Gaithersburg, MD 20878
http://www.x-waveinnovations.com
6 Employees

SBIR Award Summary

Total Number of Awards 24
Total Value of Awards $6.08MM
First Award Date 01/01/12
Most Recent Award Date 07/31/17

Key Personnel

Last Name Name Awards Contact
Xiang Dan Xiang 24 Message
Duan Jennifer Duan 10 Message
Duan Jennifer Duan 2 Message
Rentel Carlos Rentel 2 Message
Willey Carson Willey 1 Message

24 Awards Won

Phase 1 SBIR

Agency: Department of Commerce
Topic: N/A
Budget: 07/31/17 - 01/30/18
PI: Dan Xiang

NIST's seeks a high resolution DIC technology for qualification of complex AM parts. To meet this critical need, X-wave Innovations Inc. proposes to develop a 3-Dimentional Digital Image Correlation (3-D DIC) based NDT system. The proposed effort builds upon the success of XII in developing a variety of NDT technologies (including DIC system) fo...

Phase 1 SBIR

Agency: Department of Energy
Topic: 18c
Budget: 06/12/17 - 03/11/18

The majority of additive manufacturing (AM) processes are plagued by a lack of online process control. Most existing quality assurance methods involve an inspection of the finished part rather than online quality control, leaving a need for an online inspection system that can assist in the amelioration of flaws during the manufacturing process....

Phase 1 SBIR

Agency: Department of Energy
Topic: 30a
Budget: 06/12/17 - 03/11/18
PI: Dan Xiang

A major concern with nuclear energy is the safe storage of the spent nuclear fuel before final disposal. A monitoring sensor located inside a storage cask to provide direct measurements of internal conditions is of particular interest to DOE. Conventional wireless sensors have inherent limitations because the stainless steel canister shields the...

Phase 2 SBIR

Agency: Department of Energy
Topic: 33a
Budget: 08/01/16 - 07/31/18
PI: Dan Xiang

A major concern with nuclear energy is the safe storage of the spent nuclear fuel before final disposal. A monitoring sensor located inside a storage cask to provide direct measurements of internal conditions is of particular interest to DOE. Conventional wireless sensors have inherent limitations because the stainless steel canister shields th...

Phase 1 SBIR

Agency: Navy
Topic: N161-047
Budget: 07/21/16 - 01/17/17

Enhanced battery failure detection accuracy and reliability involves the integration of novel sensors and algorithms that are able to extract relevant information from the cells in a battery pack. This must be accomplished with minimum cost of ownership, installation, and operation. X-wave Innovations Inc. (XII), and its partners, The University...

Phase 1 SBIR

Agency: National Aeronautics and Space Administration
Topic: A2.01
Budget: 06/10/16 - 12/09/16

NASA seeks intelligent monitoring for hybrid and/or all electric propulsion systems, as well as methods to significantly extend the life of electric aircraft propulsion energy sources. Lithium-based batteries will continue to play a key role as an electric propulsion source due to their high energy and power densities. However, the requirement t...

Phase 1 SBIR

Agency: National Aeronautics and Space Administration
Topic: H5.03
Budget: 06/10/16 - 12/09/16
PI: Dan Xiang

NASA is seeking innovative, multifunctional and lightweight approach to integrate long-duration structural health monitoring (SHM) capabilities for space habitat long-duration mission concepts. The enabling sensing technology and integration approach should not compromise the load-carrying capability or other structural design requirement. Sensi...

Phase 1 SBIR

Agency: Navy
Topic: N153-131
Budget: 03/21/16 - 09/21/16
PI: Dan Xiang

The US Navy is looking for a portable, non-invasive sensor system to collect flow performance data to support routine performance assessments of Navy hardware and predictions with the computational fluid dynamics (CFD) based modeling and simulation (M&S) tools. The existing tomography imaging techniques for fluid/gas flow measurements have sever...

Phase 1 SBIR

Agency: Navy
Topic: N152-091
Budget: 09/23/15 - 03/31/16
PI: Dan Xiang

Surface enhancement methods, such as shot peening (SP), laser shock peening (LSP), and low-plasticity burnishing (LPB), can introduce beneficial near-surface compressive residual stress and significantly improve the fatigue resistance and foreign object damage tolerance of aerospace components such as superalloy turbine fans, disks, and integral...

Phase 2 SBIR

Agency: Air Force
Topic: AF141-156
Budget: 07/21/15 - 07/31/17
PI: Dan Xiang

ABSTRACT:To perform on-airplane weld repairs of the F-22 titanium frames and forward and aft booms is highly desired, but currently not practical due to the required high temperature thermal stress relief process. An alternative is to apply the vibration stress relief scheme, which is increasingly used in heavy industry. The major problem associ...

Load More