DRS Research

1917 W 234th St
Torrance, CA 90501
2 Employees

SBIR Award Summary

Total Number of Awards 5
Total Value of Awards $1.55MM
First Award Date 02/16/12
Most Recent Award Date 01/01/14

Key Personnel

Last Name Name Awards Contact
Dixit Rashmi Dixit 6 Message
Randall Clive Randall 1 Message
Erdemir Ali Erdemir 1 Message

5 Awards Won

Phase 2 STTR

Institution: Pennsylvania State University

Agency: Department of Energy
Topic: 01A-2014
Budget: 01/01/14 - 12/31/14

This project is about development of novel multilayer dielectric capacitors via thermal spray coating route. Use of this technology will enable mass production of multilayer ceramic capacitors at lower cost.

Phase 1 STTR

Institution: Pennsylvania State University

Agency: Department of Energy
Topic: 01A-2013
Budget: 01/01/13 - 12/31/13

The main focus of this STTR is to design, develop, and evaluate high temperature capacitors using novel thermal spray coating processes, which will allow the devices to meet the performance requirements. Multilayer coating architecture will be adopted and the electrodes and dielectric material selections will be screened in Phase I to note mat...

Phase 1 STTR

Institution: Argonne National Laboratory

Agency: Department of Energy
Topic: 01B-2013
Budget: 01/01/13 - 12/31/13

The extreme operating conditions experienced by many moving mechanical components in aerospace and automotive engines require the uses of high-performance materials and lubricants. Current oil-based lubricants degrade rapidly under such conditions and become useless, especially at high temperatures. As a result, many moving components ...

Phase 1 SBIR

Agency: Missile Defense Agency
Topic: MDA12-027
Budget: 12/22/12 - 07/01/13

High performance solid and liquid propulsion systems are subject to severe operating conditions and are required to perform at appreciably higher use-temperatures. Rocket nozzles must withstand an extremely rapid temperature increase in a highly corrosive atmosphere while maintaining a high degree of integrity. Current nozzles are often made fro...

Phase 1 SBIR

Agency: Air Force
Topic: AF112-214
Budget: 02/16/12 - 11/05/12

ABSTRACT: The main goal of the present Phase I proposal is to examine the feasibility of applying the HVOF ID gun process to coat the internal surfaces of the landing gear components. HVOF is an environmentally friendly process compared to hard chrome plating in terms of hex-Cr elimination and avoiding hydrogen embrittlement. Due to their excell...