Engeniusmicro, LLC

1718 Peachtree Street Array
Atlanta, GA 30309
http://www.engeniusmicro.com
4 Employees

SBIR Award Summary

Total Number of Awards 17
Total Value of Awards $3.6MM
First Award Date 09/26/07
Most Recent Award Date 09/15/16

Key Personnel

Last Name Name Awards Contact
English Dr. Brian A English 10 Message
Kranz Michael Kranz 8 Message
Heaton Chris Heaton 5 Message
Heaton Larry C. Heaton 1 Message
Heaton Larry C Heaton 1 Message
Yazdi Navid Yazdi 1 Message

17 Awards Won

Phase 1 SBIR

Agency: Army
Topic: A16-006
Budget: 09/15/16 - 02/14/17

Additive Manufacturing is a disruptive technology that has the ability to change how components are made, used and repaired. The past 10 years have seen a rapid increase in the availability of low cost 3d printers. The sophistication, quality and ease of use for these tools has been increasing rapidly while the cost is decreasing. There exists a...

Phase 1 SBIR

Agency: Missile Defense Agency
Topic: MDA15-026
Budget: 04/25/16 - 11/24/16

In 2006 Tanenhaus and Associates, Inc (TAI) began designing a miniature inertial measurement unit (IMU) that met size weight and power (SWaP) requirements using its patented innovative approach of combining arrays of commercial off the shelf (COTS) micro-electro-mechanical systems(MEMS) sensors to achieve far superior performance than MEMS used ...

Phase 1 STTR

Institution: Georgia Institute of Technology

Agency: Defense Microelectronics Agency
Topic: DMEA13B-001
Budget: 07/21/14 - 01/25/15

Electrochemical double-layer (ECDL) capacitors have tremendous potential as high-power delivery energy storage elements in low-volume and low-weight microelectronics systems. ECDL electrodes based on nanostructured carbon offer the potential for exception

Phase 2 SBIR

Agency: Army
Topic: A12-019
Budget: 04/18/14 - 04/17/16

This effort investigates two specific technologies to detect and monitor structural damage from high-energy impacts and blasts. The two technologies include directional transducers and structural retrofitting concepts. The directional transducers localize impacts, and enable subsequent in situ assessment of structural integrity while minimizing ...

Phase 1 STTR

Institution: Auburn University

Agency: National Science Foundation
Topic: EI-2013
Budget: 01/01/14 - 12/31/14

This Small Business Technology Transfer Research (STTR) Phase I project will develop innovative sensors based on vertically aligned carbon nanotube (CNT) diode structures to increase the range and performance of wireless microelectromechanical systems (MEMS) sensors in high-temperature environments. Currently, wireless sensors are limited by the...

Phase 2 STTR

Institution: Georgia Institute of Technology

Agency: Army
Topic: A12a-T001
Budget: 01/01/14 - 12/31/14

EngeniusMicro and the Georgia Institute of Technology propose a passive wireless sensor platform for the monitoring of corrosion on aircraft and for stored aircraft components. Multiple volumes, chambers, and compartments within aircraft are susceptible to corrosion damage because they are exposed to moisture, they trap heat, and they are diffic...

Phase 1 SBIR

Agency: Department of Energy
Topic: 21B-2014
Budget: 01/01/14 - 12/31/14

Embedded sensors are needed to monitor conditions in high-temperature industrial and power generation equipment. Existing sensor technology is limited by electronics and materials used to manufacture the sensors or by interrogation range in these environments. Developing sensors to overcome both temperature and range limitations would improve pr...

Phase 2 STTR

Institution: Georgia Institute of Technology

Agency: Army
Topic: A12A-T001
Budget: 12/23/13 - 12/23/14

EngeniusMicro and the Georgia Institute of Technology propose a passive wireless sensor platform for the monitoring of corrosion on aircraft and for stored aircraft components. Multiple volumes, chambers, and compartments within aircraft are susceptible t

Phase 1 STTR

Institution: Georgia Institute of Technology

Agency: Army
Topic: A12A-T001
Budget: 07/26/12 - 03/25/13

Aircraft, missiles, and vehicle structures are susceptible to corrosion. Engines, transmissions, blades, rocket motors, canisters, and other system components include materials that degrade over time and are not often checked. Recently, the application of condition-based maintenance (CBM) techniques has reduced lifecycle maintenance costs throug...

Phase 1 SBIR

Agency: Army
Topic: A12-019
Budget: 06/04/12 - 12/05/12

This SBIR effort seeks to develop a structural health monitoring system that can monitor structural components of vehicles that are subjected to possible blast loading conditions and high-velocity impacts. The system provides the following characteristics; capable of capturing real-time stress measurements under blast loading conditions, capable...

Load More