Passive Wireless Corrosion-Monitoring Tags

Period of Performance: 01/01/2014 - 12/31/2014


Phase 2 STTR

Recipient Firm

Engeniusmicro, LLC
1718 Peachtree Street Array
Atlanta, GA 30309
Firm POC
Principal Investigator

Research Institution

Georgia Institute of Technology
225 North Ave NW
Atlanta, GA 30332
Institution POC


EngeniusMicro and the Georgia Institute of Technology propose a passive wireless sensor platform for the monitoring of corrosion on aircraft and for stored aircraft components. Multiple volumes, chambers, and compartments within aircraft are susceptible to corrosion damage because they are exposed to moisture, they trap heat, and they are difficult to inspect. Placing passive wireless corrosion sensors in these areas would enable maintenance technicians to quickly assess the corrosive potential, or level of actual corrosion over the lifetime of the asset. The passive sensor would be scanned by an external reader and would indicate that the corrosivity within the chamber has increased or reached a critical value. Ideally, this reading could be taken without opening the chamber. This would decrease inspection time, increase inspection coverage, and enable inspections more often while yielding historical quantitative data as to structure corrosion. These sensors could also be integrated into prognosis models that allow predictive maintenance actions as part of the aircraft"s health monitoring system. EngeniusMicro will develop these sensors with fabrication support and design from Georgia Institute of Technology.