High Throughput Soft X-Ray Filters with Enhanced IR-Rejection

Period of Performance: 01/01/2011 - 12/31/2011

$99.9K

Phase 1 SBIR

Recipient Firm

Luxel Corporation
FRIDAY HARBOR, WA 98250
Principal Investigator
Firm POC

Abstract

To fully realize the advances NASA has made in x-ray microcalorimeter detectors, x-ray filters with enhanced out-of-band performance are needed. Blocking filters are essential components in these cryogenic detectors to minimize thermal load while admitting the soft x-rays of interest. Theoretically, an aluminum coating 15-20 nm thick, on each filter in the stack will provide the necessary IR attenuation. In practice, coatings this thin are less optically dense than predicted, and thickness must be nearly doubled to achieve sufficient thermal blocking. This degrades performance. The proposed innovation is to improve the thin aluminum blocking layer to increase its optical density and thermal rejection performance. Preliminary work suggests it is possible to increase the visible and IR light rejection of aluminized polyimide by a factor of 3 or more. In Phase 1, test samples will be made through altered processes. Film microstructural changes, x-ray, IR, and visible light transmission will be measured to identify process parameters that enhance IR blocking. Once optimized, coatings will provide equivalent IR blocking with thinner layers, enhancing mission throughput for the sounding rockets XQC and Micro-X in the near term and provide needed technology enhancements to make possible future missions such as IXO.